industry news
Subscribe Now

40V, 3.5A µModule Regulator is FMEA Compliant, Operates up to 150°C Junction Temperature

MILPITAS, CA – June 30, 2016 – Linear Technology introduces the LTM8003, a step-down DC/DC µModule® regulator with a 40V input voltage rating (42V abs max) and 3.5A of continuous (6A peak) output current. The LTM8003’s pinout is FMEA (failure mode effects analysis) compliant, so the output voltage stays at or below the regulation voltage in the event of short-circuit to GND, short-circuit to a neighboring pin or if a pin is left floating. The maximum junction temperature of the H-grade version is 150°C, ideal for high temperature or high power automotive and industrial applications.

The LTM8003 operates from an input voltage range of 3.4V to 40V and has an adjustable output voltage range of 0.97V to 18V. The switching frequency is adjustable via an external resistor or can be synchronized to an external clock from 200kHz to 3MHz. The LTM8003 has four operation modes: Burst Mode® operation, pulse skip mode, pulse skip mode with spread spectrum and external synch mode. The quiescent current in Burst Mode operation is 25µA (max), so the LTM8003 is well suited for battery operated systems, specifically “keep alive” systems.

The efficiency at 12VIN to 3.3VOUT is 90% and the LTM8003 delivers 3.5A of output current up to 100°C ambient without a heat sink or airflow. The LTM8003 includes a switching regulator, inductor and other supporting components in a 6.25mm x 9mm x 3.32mm BGA package. Only the bulk input and output capacitors and a few resistors are required to complete the design.

The LTM8003 is operational from -40°C to 125°C or -40°C to 150°C. 1,000-piece pricing starts at $11.30 each. For more information, visit www.linear.com/product/LTM8003.

Summary of Features: LTM8003 

  • Wide Input Voltage Range:
    3.4V to 40V
  • Wide Output Voltage Range:
    0.97V to 18V
  • 3.5A Continuous Output Current (6A Peak)
  • FMEA Compliant Pinout
  • 150°C Maximum Operating Temperature (H-Grade)
  • Selectable Switching Frequency:
    200kHz to 3MHz
  • External Synchronization
  • Low Quiescent Current = 25µA
  • Programmable Soft-Start
  • 6.25mm x 9mm x 3.32mm BGA Package

Pricing shown is for budgetary use only and may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

OPTIGA™ TPM SLB 9672 and SLB 9673 RPI Evaluation Boards
Sponsored by Mouser Electronics and Infineon
Security is a critical design concern for most electronic designs today, but finding the right security solution for your next design can be a complicated and time-consuming process. In this episode of Chalk Talk, Amelia Dalton and Andreas Fuchs from Infineon investigate how Infineon’s OPTIGA trusted platform module can not only help solve your security design concerns but also speed up your design process as well.
Jun 26, 2023
35,450 views