industry news
Subscribe Now

Imec demonstrates Junction-less Gate-All-Around Lateral and Vertical Nanowire FET Devices

Leuven (Belgium) – June 15, 2016 – Today, at the 2016 Symposia on VLSI Technology & Circuits, nano-electronics research center imec presented junction-less gate-all-around (GAA) nanowire (NW) FETs built in lateral and vertical configurations. With their simplified processing, improved reliability, reduced low frequency noise and lower IOFF values, they are an attractive option for advanced logic, low power circuits and analog/RF applications. Moreover, they enable a simpler path for considerable SRAM scaling via the stacking of vertical devices. 

GAA-NWFETs -with the gate fully wrapped around the device body for optimum electrostatics control- are considered one of the most promising candidates for enabling (sub-)5nm CMOS scaling. Moreover, junction-less devices offer great process simplicity as they do not require junctions.

Previously, at the 2015 VLSI and IEDM conferences, imec demonstrated the superior reliability behavior of these devices and their potential for low power circuits. At today’s VLSI symposium, imec thoroughly evaluated key control knobs for junction-less devices operation, namely controlling the NW doping vs. NW size to achieve optimum performance. The feasibility of these devices for analog/RF applications was also studied, concluding them to be a viable option with reported similar speeds and voltage gains as compared to inversion-mode NWFETs.  

Imec also addressed the variability of junction-less GAA-NWFETs, showing that whereas the VT mismatch increased with increasing nanowire doping for NMOS devices, less impact was observed for PMOS devices and at smaller nanowire dimensions.

Additionally, the junction-less concept was demonstrated in vertical devices integrated on the same 300mm Si platform, also used for lateral devices. Low IOFF and IG values and good electrostatics were achieved over a wide range of vertical nanowire arrays. 

Lastly, taking advantage of the junction-less devices process simplicity, Imec further explored their potential by proposing a novel SRAM cell design with two vertically stacked junction-less vertical NWFETs with the same channel doping, thus enabling reduction of the SRAM area per bit by 39%. 

“Imec’s work has contributed to an increased and more in-depth understanding of junction-less GAA-NWFETs,” stated Dan Mocuta, Director Logic Device and Integration at imec. “Our thorough evaluation highlighted the excellent performance of junction-less lateral and vertical nanowire devices for beyond 5nm logic devices. Moreover, junction-less devices appeared as a viable option for analog/RF applications, whereas stacked junction-less vertical nanowire FETs could significantly reduce SRAM area.”

Imec’s research into advanced logic scaling is performed in cooperation with imec’s key partners in its core CMOS programs including GlobalFoundries, Intel, Micron, SK Hynix, Samsung, TSMC, Huawei, Qualcomm and Sony.

This press release can be downloaded at http://www2.imec.be/be_en/press/imec-news/imec-VLSI-junctionless-device-IIIV.html

About imec

Imec performs world-leading research in nanoelectronics and photovoltaics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, USA, China, India and Japan. Its staff of about 2,500 people includes about 740 industrial residents and guest researchers. In 2015, imec’s revenue (P&L) totaled 415 million euro. Further information on imec can be found at www.imec.be. Stay up to date about what’s happening at imec with the monthly imec magazine, available for tablets and smartphones (as an app for iOS and Android), or via the website www.imec.be/imecmagazine

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Why Wiwynn Energy-Optimized Data Center IT Solutions Use Cadence Optimality Explorer

Sponsored by Cadence Design Systems

In the AI era, as the signal-data rate increases, the signal integrity challenges in server designs also increase. Wiwynn provides hyperscale data centers with innovative cloud IT infrastructure, bringing the best total cost of ownership (TCO), energy, and energy-itemized IT solutions from the cloud to the edge.

Learn more about how Wiwynn is developing a new methodology for PCB designs with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver.

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

PolarFire® SoC FPGAs: Integrate Linux® in Your Edge Nodes
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Diptesh Nandi from Microchip examine the benefits of PolarFire SoC FPGAs for edge computing applications. They explore how the RISC-V-based Architecture, asymmetrical multi-processing, and Linux-based reference solutions make these SoC FPGAs a game changer for edge computing applications.
Feb 6, 2024
12,171 views