industry news
Subscribe Now

Imec Presents Back-Side Illuminated CMOS Image Sensor with UV-Optimized Antireflective Coating

VISION (Stuttgart) – Nov. 4, 2014 – At this week’s VISION 2014 exhibition, imec presents a backside-illuminated (BSI) CMOS image sensor chip featuring a new anti-reflective coating (ARC) optimized for UV light. Targeting imaging solutions in new markets such as life sciences, the achievement is an important addition to imec’s customized 200mm CMOS fab. This 200mm process line enables imec to offer design, prototyping and low volume manufacturing of custom specialty chip solutions such as highly specialized CMOS image sensors.

Known for its superior enhanced light sensitivity compared with image sensors using front side illumination (FSI), BSI sensors are top candidates to further improve the performance of CMOS image sensors. Widely spread today in consumer applications such as smart phones, BSI imagers are expected to enter the higher-end application space of e.g. industrial inspection.

BSI imagers have a clear advantage when it comes to fill factor for the pixel area, angular response, and the complete avoidance of absorption or scattering losses in the metal interconnect layers. The cost for these light gathering improvement are the extra process complexity for the backside fabrication and possible electrical and optical losses at the new backside silicon interface. Therefore the engineering of the backside layers and interfaces is key to develop high performance BSI devices

Imec is tackling these challenges to exploit the benefits of BSI imagers for highly specialized customized imagers for space applications, high speed cameras, semiconductor inspection and medical applications,… To minimize reflection losses and maximize transmission of light to the sensor, specific anti-reflective coatings (ARC) are developed for various applications targeting different regions of the light spectrum. The coatings are applied at wafer level as part of the BSI process flow.

Imec has already developed an ARC for visible light range (400nm-800nm) with >70% QE over the entire spectral range. Imec’s new ARC, targeting the UV range, shows excellent performance at near UV wavelengths, with Quantum Efficiency (Q.E.) values above 50 percent over the entire spectral range from 260nm to 400nm wavelength.

“This is an important milestone for imec’s customized 200mm CMOS process line, demonstrating our expertise and capability to design, prototype and manufacture high-end CMOS image sensors,” said Rudi Cartuyvels, senior vice president, Smart Systems & Energy Technologies at imec. “The development widens our portfolio towards new markets, offering solutions for both visible and UV imaging in semiconductor equipment applications, such as advance lithography and wafer and mask inspection.”

This press release can be downloaded at http://www2.imec.be/be_en/press/imec-news/imec-UV-ARC-CMOS-imager.html

About imec

Imec performs world-leading research in nanoelectronics and photovoltaics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in the Netherlands, Taiwan, US, China, India and Japan. Its staff of over 2,080 people includes more than 670 industrial residents and guest researchers. In 2013, imec’s revenue (P&L) totaled 332 million euro. Further information on imec can be found at www.imec.be. Stay up to date about what’s happening at imec with the monthly imec magazine, available for tablets and smartphones (as an app for iOS and Android), or via the website www.imec.be/imecmagazine

Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a “stichting van openbaar nut”), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shanghai) Co. Ltd.) and imec India (Imec India Private Limited).

Leave a Reply

featured blogs
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

Non-Magnetic Interconnects
Sponsored by Mouser Electronics and Samtec
Magnets and magnetic fields can cause big problems in medical, scientific, industrial, space, and quantum computing applications but using a non-magnetic connector can help solve these issues. In this episode of Chalk Talk, Amelia Dalton and John Riley from Samtec discuss the construction of non-magnetic connectors and how you could use non-magnetic connectors in your next design.
May 3, 2023
40,982 views