industry news
Subscribe Now

Precision 50µV Offset Op Amp Operates with 76V Input Range

MILPITAS, CA – February 14, 2013 – Linear Technology introduces the LT6016 and LT6017, dual and quad wide input range operational amplifiers. These amplifiers combine high precision with the ruggedness and versatility of LTC’s unique Over-the-Top® architecture. Input offset voltage is 50µV max, input bias current is 5nA, and low frequency noise is 0.5µVP-P making these devices suitable for a wide range of precision industrial, automotive, and instrumentation applications.

Over-the-Top inputs provide true operation well beyond the V+ rail. The LT6016/LT6017 function normally with inputs up to 76V above V independent of whether V+ is 3V or 50V. Additional fault tolerant features protect the op amps from reverse supply conditions (up to -50V at V+), negative transients (up to -25V at VIN), and forced output voltage with no power supplied (up to 50V at VOUT). This robust architecture is especially useful for applications where the amplifier is at the analog interface to another board, and for high-side and low-side current sensing.

The LT6016 and LT6017 are fully specified over -40°C to 85°C, -40°C to 125°C, and -55°C to 150°C temperature ranges. The dual LT6016 is available in an 8-lead MSOP package, starting at $2.50 each in quantities of 1000. The quad LT6017 is available in a 6mm x 3mm DFN package, starting at $3.96 each in quantities of 1000. For more information, visit www.linear.com/product/LT6016 and www.linear.com/product/LT6017.

Summary of Features: LT6016/LT6017

    • Input Common Mode Range:
      V– to V– + 76V
    • VOS: ±50µV (Maximum)
    • Low Power: 315µA/Amplifier
    • CMRR, PSRR: 126dB
    • Gain Bandwidth Product: 3.2MHz
    • High Voltage Gain: 1000V/mV
    • Reverse Battery Protection to 50V
    • No Phase Reversal
    • No Supply Sequencing Problems
    • Operating Temperature Range: 
      –55°C to 150°C

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule and are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

  • High-Side or Low-Side Current Sensing
  • Battery/Power Supply Monitoring
  • 4mA to 20mA Transmitters
  • High Voltage Data Acquisition
  • Battery/Portable Instrumentation

Leave a Reply

featured blogs
May 6, 2026
Hollywood has struck gold with The Lord of the Rings and Dune'”so which sci-fi and fantasy books should filmmakers tackle next?...

featured paper

Want early design analysis without simulation?

Sponsored by Siemens Digital Industries Software

Traditional verification methods are failing today's complex IC designs, which require a proactive, early-stage analysis approach. A shift-left methodology addresses IP block integration challenges and the limitations of traditional simulation and ERC tools. Insight Analyzer detects hard-to-find leakage issues across power domains, enabling early analysis without full simulation. Identify inefficiencies earlier to reduce rework, improve reliability, and enhance power performance.

Click to read more!

featured chalk talk

Designing Scalable IoT Mesh Networks with Digi XBee® for Wi-SUN
Sponsored by Mouser Electronics and Digi and Silicon Labs
In this episode of Chalk Talk, Quinn Jones from Digi, Chad Steider from Silicon Labs and Amelia Dalton explore how Wi-SUN Micro-Mesh can reduce cost and simplify deployment for your next IoT mesh network. They also investigate the benefits that Digi XBee solutions bring to these types of networks and how you can jump start your next IoT mesh network design with Silicon Labs and Digi.
May 4, 2026
12,764 views