industry news
Subscribe Now

AVX Announces the 6411 Series PCI Express® M.2 Connectors from Kyocera Connector Products

FOUNTAIN INN, S.C. (August 8, 2016) – AVX Corporation, a leading manufacturer of passive components and interconnect solutions, and the only authorized supplier of Kyocera Electronic Devices to the Americas and Europe, announces the 6411 Series PCI Express® M.2 connectors from Kyocera Connector Products®. Compatible with the new M.2 specification developed by the Peripheral Component Interconnect Special Interest Group (PCI-SIG), 6411 Series PCI Express connectors support multiple functions with high-speed signal integrity on a single card, effectively contributing to thinner and lighter notebook and mobile computers, including Ultrabook™ and tablet PCs.

Designed to support high-speed, high-integrity PCIe Gen 3, USB 3.0, and SATA 3.0 signal transmissions for Wi-Fi, Bluetooth®, solid state drive (SSDs), global navigation satellite system (GNSS), near field communication (NFC), wireless gigabit (WiGig), and 2G, 3G, and 4G wireless wide area network (WWAN) applications, the 6411 Series multifunction card connectors can achieve signal speeds up to 8Gbps, and improve efficiency by allowing angled insertion and removal from 0° to 15° relative to the PCB.

“Conventionally, individual modules and connectors have been required to enhance the function of each wireless application, like Wi-Fi or Bluetooth. With the new PCI Express M.2 specification, though, multiple modules can utilize the same slot designed for each key, which saves a significant amount of board space, and helps designers satisfy demands for smaller, lighter, and thinner connected electronics,” said Nick Bogovich, product marketing and systems manager for Kyocera Connector Products at AVX. “Further, in addition to PCs, the space-savings and signal integrity that the 6411 Series connectors provide will enable their use in a variety of automotive, engineering, and manufacturing applications that can benefit from the ability to update or otherwise modify internal computer software by simply plugging into the card edge connector.”

Featuring a 0.5mm pitch and 67 dual-location copper alloy pin contacts, each rated for 0.4A and 50V, 6411 Series PCI Express M.2 connectors are available with 12 keying options (A – H and J – M), and in both single-and double-sides modules with various heights: the M1.8 midplane connector with an extremely low 1.8mm maximum mounted height, the H2.3 single-sided connector with a maximum height of 2.3mm, and the H3.2 double-sided connector with a maximum height of 3.2mm. RoHS compliant and halogen-free, the series is rated for 60 mating cycles and operating temperatures spanning -40°C to +80°C, and is capable of withstanding up to 285G shock. 6411 Series connectors are shipped on tape and reel in quantities of 800 or 1,000, and lead-time for the series is 12 weeks.

For more information about AVX’s 6411 Series PCI Express M.2 connectors by Kyocera Connector Products, please visithttp://www.avx.com/products/connectors/specialty/6411-series-pcie-m-2/. There, you can access the product datasheet, Kyocera Connectors Guide, part number information, Quick Facts, and instruction manuals, as well as request a sample. For all other inquiries, please visit www.avx.com, emailked@avx.com, call 864-967-2150, or write to One AVX Boulevard, Fountain Inn, S.C. 29644.

About AVX

AVX Corporation is a leading international manufacturer and supplier of electronic passive components and interconnect solutions with 20 manufacturing and warehouse facilities in 11 countries around the world. AVX offers a broad range of devices including capacitors, resistors, filters, timing and circuit protection devices, and connectors. The company is publicly traded on the New York Stock Exchange (NYSE:AVX).

A member of the Kyocera Group since 1990, AVX is also the only company authorized to supply Kyocera’s electronic devices to the Americas and Europe. Established in 1959 and based in Kyoto, Japan, Kyocera Corporation is a leading international supplier of connectors, capacitors, ceramic resonators, surface acoustic wave (SAW) filters and duplexers, and crystal oscillators and timing devices.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Why Wiwynn Energy-Optimized Data Center IT Solutions Use Cadence Optimality Explorer

Sponsored by Cadence Design Systems

In the AI era, as the signal-data rate increases, the signal integrity challenges in server designs also increase. Wiwynn provides hyperscale data centers with innovative cloud IT infrastructure, bringing the best total cost of ownership (TCO), energy, and energy-itemized IT solutions from the cloud to the edge.

Learn more about how Wiwynn is developing a new methodology for PCB designs with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver.

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

Advantech Industrial AI Camera: Small but Mighty
Sponsored by Mouser Electronics and Advantech
Artificial intelligence equipped camera systems can be a great addition to a variety of industrial designs. In this episode of Chalk Talk, Amelia Dalton and Ryan Chan from Advantech explore the components included in an industrial AI camera system, the benefits of Advantech’s AI ICAM-500 Industrial camera series and how you can get started using these solutions in your next industrial design. 
Aug 23, 2023
30,333 views