industry news
Subscribe Now

Solar Antenna technology from NovaSolix: Twice as efficient and 80% less expensive than photo-voltaic technology

Palo Alto, Calif. – April 5, 2017 – NovaSolix today announced the NovaSolix Solar Antenna technology, a disruptive technology enabling solar energy to expand beyond the inherent limitations of photo-voltaic (PV) cells. The NovaSolix Solar Antenna technology converts a much broader spectrum of light waves to electricity than PV through the use of miniature carbon nanotube (CNT) antennas. Prototypes will be available Q4 2017.

The NovaSolix Solar Antenna technology, also known as rectenna, was developed to dramatically improve efficiency, cost, weight and deployment of solar technology, thereby expanding the potential applications of solar energy. Georgia Tech studies of rectenna technology cite theoretical efficiencies of 40-80 – two-to-four times better than PV.

Initial applications will include fixed wing aircraft, drones and satellites. In future iterations, the NovaSolix Solar Antenna technology will replace PV as the dominant form of solar power. Larry Cooke, NovaSolix’s Founder and CTO said, “PV is closing in on its theoretical limits while solar antenna technology is at the very beginnings of its potential.”

“NovaSolix’s Solar Antenna technology will provide electricity at a lower cost, on an unsubsidized basis, than any fossil fuel and will be the lowest cost power available,” said Cooke.

The NovaSolix team includes industry veterans with decades of advanced semiconductor and process manufacturing experience. NovaSolix early estimates indicate the associated costs of manufacturing their technology could be 80-90% percent less than PV. “We are well advanced in the process of productizing our technology. It will have a tremendous impact on renewable energy that is so critical to our world,” Cooke stated. 

About NovaSolix Technology

NovaSolix has developed a truly revolutionary new solar technology. Initially using micron level semiconductor processing, developed using Stanford Nanofabrication Facility’s equipment,

NovaSolix has created quartz based chips on which millions of nanometer diameter carbon nanotubes are grown per square inch. These form low impedance antennas coupled to diodes with petahertz cutoff frequencies, the fastest diodes ever built, enough to capture and rectify up to 80% of all sunlight from infrared down to ultraviolet. Replacing the quartz with flexible rolled glass, NovaSolix will create a continuous high volume roll to roll manufacturing process using micron level printing and maskless self-aligning lithography to produce power at a tenth of the cost of existing PV systems.

The Company has filed 7 patents.

About NovaSolix

Headquartered in Palo Alto, California, NovaSolix is focused on the development and production of renewable solar energy. The NovaSolix Solar Antenna technology converts light waves to electricity through the use of miniature carbon nanotube antennas. This disruptive technology is over two times more efficient than photovoltaic (PV) cells and is up to 10x more cost effective. For more information: info@novasolix.com or 650.850.1535


Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

FlyOver® Technology: Twinax FlyOver® System for Next Gen Speeds -- Samtec and Mouser
Sponsored by Mouser Electronics and Samtec
In this episode of Chalk Talk, Amelia Dalton and Matthew Burns from Samtec investigate the challenges of routing high speed data over lossy PCBs. They also discuss the benefits that Samtec’s Flyover® cable assembly systems bring to data center and embedded designs and how Samtec is furthering innovation with their high speed interconnect solutions. 
Apr 15, 2024
1,449 views