industry news
Subscribe Now

THine Introduces Standalone ISP and Firmware Development Tools to Stream Uncompressed 4K 30fps Video

TOKYO, June 9, 2021 / SANTA CLARA, CA, June 8, 2021 — THine Electronics, Inc. (Tokyo Stock Exchange/JASDAQ: 6769) and its fully owned USA subsidiary, THine Solutions, Inc., the leaders in high-speed serial interfaces and image signal processing, today introduced a new standalone Image Signal Processor (ISP), the THP7312-P, to support video streaming resolutions up to 4K 30 fps in YUV format.

The new THP7312-P supports all the features of our existing THP7312 but provides higher video streaming resolutions at higher frame rates. It also includes a RAW8 output option which is required to interface and collaborate with the ISP block of large scale SoCs. The 32bit RISC-based Hard-wired Image Signal Processor CPU in these ICs achieves high performance including <1ms low latency and <0.5W power efficiency.

The new THP7312-P is available in the following 2 package options, a BGA (8.0 x 8.0 mm) and a smaller WLCSP (3.9 x 4.0 mm).

Support Tools:

The THP7312-P is supported by THine’s upgraded GUI based ISP firmware development tool that accommodates the THP7312-P’s higher output speeds. The upgraded Camera Development Kit (CDK) tool includes various critical and easy to use software tools along with a hardware kit (THEVAP7312-P) withtheTHP7312-P inside, allowing customers to quickly develop their own customized ISP firmware IP to drive and manage production of their CMOS camera sensor module.

Key Technical Advantages:

  • 4.8Gbps MIPI CSI-2 output covering 4K 30fps YUV
  • RAW8 Output Option for Large Scale SoC Interfaces
  • Supports GUI-based Firmware Development Tools
  • Camera Calibration compensation of Image Sensor/Lens variations for Perfect Unit-to-Unit Image Quality in Production

“The increase of MIPI CSI-2 output data rate may sound like a moderate improvement, but it is actually a breakthrough for many applications where real-time uncompressed 4K vision is required,” said Tak Iizuka, Chief Solution Architect of THine Solutions. “With the THP7312-P and our development tools, customers can customize their high-performance video streaming application and get to production quicker than ever before.”

To learn more about the THP7312-P, please visit www.thine.co.jp/en/products/detail/THP7312-PBGA.html for the BGA package and www.thine.co.jp/en/products/detail/THP7312-PWLCSP.html for the WLCSP package.

To learn more about the CDK tool kit, visit www.thinesolutions.com/camera-development-kit-cdk  and the CDK video at https://www.youtube.com/watch?v=XPfAHk4xTXo

About THine: THine Electronics, Incorporated is a fabless semiconductor and AI/IoT-based device/system company that provides innovative mixed signal LSI and analog technologies such as V-by-One® HS, LVDS, other high-speed data signaling, timing controller, analog-to-digital converter, ISP, power management and drivers for LEDs and motors, as well as AI/IoT-based devices, services, and systems. We also provide Kit solutions and design-aid tools for embedded camera and video transmission extension applications. Our target markets include Medical Scopes, Surgical Microscopes, Multifunction Printers, Surveillance Cameras, Body Cams, Biometric Devices, Document Scanners, AR/VR Systems, Biometric Devices, USB Webcams, High Resolution Displays, and Automotive Infotainment Systems.  THine is headquartered in Tokyo, and has subsidiaries in the US (Santa Clara, CA), Yokohama, Taipei, Seoul, Hong Kong, Shenzhen, and Shanghai. THine is listed on JASDAQ of Tokyo Stock Exchange under the security code of 6769.  For more information, please visit www.thine.co.jp/en/.

Leave a Reply

featured blogs
Jun 17, 2021
In today’s blog episode we would like to introduce our newest White Paper; “System and Component qualifications of VPX solutions, Create a novel, low-cost, easy to build, high reliability test platform for VPX modules“. Over the past year Samtec has worked w...
Jun 17, 2021
I have written before about standards in general (including one that is 2000 years old) in my post Why Do Layout Designers Say "Stream Out"? and the new cell-phone vocoder standard in... [[ Click on the title to access the full blog on the Cadence Community site. ]...
Jun 16, 2021
Learn how designers increase productivity with AI chip design tools and improve chip performance & energy efficiency to meet PPA targets on complex designs. The post Why Now Is the Time to Create an AI Strategy for Chip Design appeared first on From Silicon To Software....
Jun 14, 2021
By John Ferguson, Omar ElSewefy, Nermeen Hossam, Basma Serry We're all fascinated by light. Light… The post Shining a light on silicon photonics verification appeared first on Design with Calibre....

featured video

Kyocera Super Resolution Printer with ARC EV Vision IP

Sponsored by Synopsys

See the amazing image processing features that Kyocera’s TASKalfa 3554ci brings to their customers.

Click here for more information about DesignWare ARC EV Processors for Embedded Vision

featured paper

Adaptive Beamformer: An HLS Optimization Case Study with SLX FPGA

Sponsored by Silexica

Learn how SLX FPGA provides a productivity and efficiency boost when using high-level synthesis (HLS) to implement FPGA applications in C/ C++, through automated analysis and optimization. In this beamforming example, SLX FPGA achieves a lower latency and cuts development time from weeks down to minutes, compared to hand-optimization for similar resource costs.

Click to read more

featured chalk talk

The Wireless Member of the DARWIN Family

Sponsored by Mouser Electronics and Maxim Integrated

MCUs continue to evolve based on increasing demands from designers. We expect our microcontrollers to do more than ever - better security, more performance, lower power consumption - and we want it all for less money, of course. In this episode of Chalk Talk, Amelia Dalton chats with Kris Ardis from Maxim Integrated about the new DARWIN line of low-power MCUs.

Click here for more information about Maxim Integrated MAX32665-MAX32668 UB Class Microcontroller