industry news
Subscribe Now

ROHM’s New Compact Surface Mount 45W Output AC/DC Converter ICs: Equipped with Integrated High Voltage Super Junction MOSFET

Flyback converter ICs maximizing performance, reducing system cost and increasing reliability for industrial and consumer power supply solutions

Santa Clara, CA and Kyoto, Japan, Dec. 16, 2021 (GLOBE NEWSWIRE) — ROHM Semiconductor today introduced the BM2P06xMF-Z series (BM2P060MF-ZBM2P061MF-Z, and BM2P063MF-Z) of AC/DC flyback converter ICs with an integrated 730V breakdown MOSFET. These devices are ideal for auxiliary power supply and Switch Mode Power Supply (SMPS) solutions for industrial drives, as well as home appliances including air conditioners, white goods, and factory automation equipment. They require no additional heatsinks and no discharge resistors or capacitors. This integrated solution helps designers shorten design time, simplify circuitry, reduce cost, and increase reliability.

In recent years, AC/DC converters for home and industrial use have been required to not only support 85V-264 VAC to accommodate different AC voltages around the world, but also comply with international standards such as ENERGY STAR® for energy savings and the IEC 62368 safety standard. It is also important for AC/DC converter ICs to be surface mount to reduce factory mounting costs. However, as high heat/high loss DMOSFETs and planar MOSFETs are still widely used in AC/DC converter ICs, until now it has been difficult to provide tens of watts of output power in a surface mount package.

To address these issues, ROHM developed the new BM2P06xMF-Z compact surface mount high power 45W devices. They are equipped with an original low-loss Super Junction (SJ) MOSFET, together with optimized PWM control circuitry – facilitating the development of 85V to 264V AC/DC converters. Adopting a surface mount package supports automatic board mounting (which was previously difficult to do). Meanwhile, the implemented functions ensure compliance with the IEC62368 safety standard, even when the discharge resistor (a source of loss during standby) is removed. Additionally, original low standby power control technology is applied – resulting in extremely low standby power consumption. Supply voltages up to 60V (VCC) are also supported – eliminating the need for an external step-down power supply circuit.

Compared to general products with equivalent performance, automatic mounting contributes to lower factory mounting costs. Moreover, ROHM is able to reduce standby power by over 90% along with the number of power supply circuit components by four, contributing to greater power savings and higher reliability in applications.

Going forward, ROHM will continue to deliver greater system energy savings and optimization by not only developing a wide range of power semiconductors and advanced analog ICs, but also by providing optimal solutions for each application.

Application Examples

  • Consumer electronics such as air conditioners, appliances, monitors, and hair dryers
  • Industrial equipment including inverters, AC servos, routers, and office automation devices
  • Suitable for AC/DC converters up to 45W output in consumer and industrial applications

Pricing & Availability

  • Pricing: $2.13/unit (samples, excluding tax)
  • Sales launch date: September 2021
  • Availability: Samples available now; mass production January 2022

Both the new product and an evaluation board are available for purchase through online distributors Digi-Key, Mouser, and Farnell.

For more information, please visit

Leave a Reply

featured blogs
May 19, 2022
The current challenge in custom/mixed-signal design is to have a fast and silicon-accurate methodology. In this blog series, we are exploring the Custom IC Design Flow and Methodology stages. This... ...
May 19, 2022
Learn about the AI chip design breakthroughs and case studies discussed at SNUG Silicon Valley 2022, including autonomous PPA optimization using The post Key Highlights from SNUG 2022: AI Is Fast Forwarding Chip Design appeared first on From Silicon To Software....
May 12, 2022
By Shelly Stalnaker Every year, the editors of Elektronik in Germany compile a list of the most interesting and innovative… ...
Apr 29, 2022
What do you do if someone starts waving furiously at you, seemingly delighted to see you, but you fear they are being overenthusiastic?...

featured video

Building safer robots with computer vision & AI

Sponsored by Texas Instruments

Watch TI's demo to see how Jacinto™ 7 processors fuse deep learning and traditional computer vision to enable safer autonomous mobile robots.

Watch demo

featured paper

Reduce EV cost and improve drive range by integrating powertrain systems

Sponsored by Texas Instruments

When you can create automotive applications that do more with fewer parts, you’ll reduce both weight and cost and improve reliability. That’s the idea behind integrating electric vehicle (EV) and hybrid electric vehicle (HEV) designs.

Click to read more

featured chalk talk

Single Pair Ethernet : Simplifying IIoT & Automation

Sponsored by Mouser Electronics and Analog Devices

Industry 4.0 with its variety of sensing solutions and fieldbus systems can make communication pretty tricky but single pair ethernet can change all of that. In this episode of Chalk, Amelia Dalton chats with representatives from three different companies: Analog Devices, HARTING and Würth Elektronik to discuss the benefits of single pair Ethernet, what the new IEEE standard means to SPE designs, and what you should consider when working on your next single pair Ethernet design.

Click here for more information about Single Pair Ethernet solutions from Analog Devices, HARTING and Würth Elektronik