EEJournal

industry news archive
Subscribe Now

Saelig Introduces MX100Q Series Compact 4-Channel 210W Power Supplies

Mixed-mode regulation merges a switch-mode power conversion design with linear final regulation to give excellent noise and transient characteristics resembling linear supply performance but at greatly reduced weight
November 20, 2019
Fairport, NY, USA: Saelig Company, Inc. has announced the introduction of the AIM-TTi MX100Q Series Power Supplies, versatile 4-output laboratory power sources which use mixed mode regulation to provide up to 210W of power, shared by up to four outputs, in one compact case. Mixed-mode regulation combines switch-mode architecture with linear final stage regulation to give performance characteristics resembling a totally linear design but at greatly reduced weight. Each output can provide 0 to 35 volts at 0 to 3 amps, with output combination abilities that extend output voltages up to 70V and currents up to 6A. The MX100Q series … Read More → "Saelig Introduces MX100Q Series Compact 4-Channel 210W Power Supplies"

Keysight, Sprint Collaborate to Accelerate Commercial Deployment of 5G Technology

U.S. mobile operator selects Keysight’s 5G network emulation solutions to validate performance of new 5G devices
November 20, 2019

SANTA ROSA, Calif., November 19, 2019

Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced that Sprint has selected Keysight’s 5G network emulation solutions to validate the performance of 5G new radio (NR) mobile devices, accelerating U.S. 5G commercial deployment of fixed wireless access (FWA) and enhanced mobile broadband (eMBB) applications.

This collaboration leverages Keysight’s 5G Read More → "Keysight, Sprint Collaborate to Accelerate Commercial Deployment of 5G Technology"

With proFPGA quad Intel® Stratix® 10 GX 10M System, PRO DESIGN Reaches a new Level in FPGA-based Prototyping

November 19, 2019

Munich, 18 November 2019 – PRO DESIGN, leading supplier of high-speed ASIC and SoC verification platforms, today announced the launch of its innovative high-capacity proFPGA quad Stratix® 10 GX 10M system. It is the next generation of its successful, modular, scalable and most compact high-performance FPGA Prototyping solution based on the recently released Intel® Stratix® 10 GX 10M FPGA, which is currently the biggest FPGA on the market. The new system handles complex ASIC and SoC Designs up to 2 Billion ASIC gates and gives design and verification engineers unprecedented speed and flexibility for high-speed verification and bug hunting to shorten the time to market … Read More → "With proFPGA quad Intel® Stratix® 10 GX 10M System, PRO DESIGN Reaches a new Level in FPGA-based Prototyping"

Graphcore leveraged Mentor’s Questa technologies to verify massive Colossus GC2 AI processor

November 19, 2019

Mentor, a Siemens business, has revealed that artificial intelligence (AI) processing leader Graphcore leveraged Mentor’s Questa™ software for simulation and verification of IP technologies to rapidly verify Graphcore’s massive Colossus GC2 Intelligence Processing Unit (IPU). Colossus has been shipping to early access customers for over a year and is now shipping in production volume.

Engineered to boost the performance of machine intelligence models for both training and inference, Graphcore’s Colossus IPU is one of the most sophisticated processors ever created. Featuring a novel architecture, Colossus integrates 23.6 billion transistors and more … Read More → "Graphcore leveraged Mentor’s Questa technologies to verify massive Colossus GC2 AI processor"

OpenVPX Faceplates From Pixus are Customizable for Supplemental Air Intake

November 19, 2019

Waterloo, Ontario  —  Nov 19, 2019 –  Pixus Technologies, a provider of embedded computing and enclosure solutions, offers front faceplate panels for OpenVPX modules with customized cutouts.  These hole patterns include designs for airflow intake.  

Highly compact OpenVPX systems where the modules are loaded horizontally often have minimal space available for airflow intake in front-to-rear cooling configurations.  To supplement the chassis cooling, it can be beneficial to have air intake holes that allow more airflow to be pulled directly over the OpenVPX modules.  With Pixus’ custom front panel and … Read More → "OpenVPX Faceplates From Pixus are Customizable for Supplemental Air Intake"

SC19: eSilicon to Demonstrate 7nm 58G DSP-Based SerDes Over Five-Meter Samtec Cable Assembly

November 19, 2019

eSilicon, a leading provider of FinFET-class ASICs, market-specific IP platforms and advanced 2.5D packaging solutions, and Samtec, a leading global manufacturer of electronic interconnect solutions, will demonstrate eSilicon’s 7nm 58G DSP-based PAM4/NRZ SerDes capabilities for challenging data center applications over a five-meter Samtec cable assembly.

What
 eSilicon and Samtec have co-developed system-level solutions that emulate next-generation data center architectures for typical 19-inch rack-mount applications.

eSilicon will demonstrate its SerDes operation over two 67cm AcceleRateRead More → "SC19: eSilicon to Demonstrate 7nm 58G DSP-Based SerDes Over Five-Meter Samtec Cable Assembly"

Synopsys Completes Acquisition of DINI Group

November 19, 2019

MOUNTAIN VIEW, Calif., Nov. 15, 2019 /PRNewswire/ — Synopsys, Inc. (NASDAQ: SNPS) today announced it has completed its acquisition of DINI Group, an established leader in FPGA-based boards and solutions, headquartered in La Jolla, California.

The rapid growth of software used in automotive, artificial intelligence (AI), 5G, and high-performance computing (HPC) applications creates an enormous hardware/software validation challenge for system-on-chip (SoC) designers. To address … Read More → "Synopsys Completes Acquisition of DINI Group"

Bittium Launches a Secure Robotic Process Automation Solution to Complement Its Innovative R&D Services

November 19, 2019

Oulu, Finland, November 15, 2019 – Bittium launches a secure Robotic Process Automation Solution to complement its innovative R&D Services. This solution is based on Bittium’s own secure platform. Robotic Process Automation (RPA) is a method for streamlining business processes by automating laborious manual tasks, which are time-consuming, repetitive and prone to errors. Bittium’s extensive experience in product development, including software development and test automation, has accelerated the service development; and the company has been leveraging RPA internally already for couple of years from product development to financial management.

Computer software, known as a bot, is … Read More → "Bittium Launches a Secure Robotic Process Automation Solution to Complement Its Innovative R&D Services"

MLPerf Releases Over 500 Inference Benchmark Results, Showcasing a Wide Range of Machine Learning Solutions

November 19, 2019

Mountain View, CA – November 6, 2019 – After introducing the first industry-standard inference benchmarks in June of 2019, today the MLPerf consortium released over 500 inference benchmark results from 14 organizations. These benchmarks measure how quickly a trained neural network can process new data for a wide range of applications (autonomous driving, natural language processing, and many more) on a variety of form factors (IoT devices, smartphones, PCs, servers and a variety of cloud solutions). The results of the benchmarks are available on the MLPerf website at https://mlperf.org/. 

Read More → "MLPerf Releases Over 500 Inference Benchmark Results, Showcasing a Wide Range of Machine Learning Solutions"

featured blogs
Sci-Fi and Fantasy Books They Should Make into Movies
May 6, 2026
Hollywood has struck gold with The Lord of the Rings and Dune'”so which sci-fi and fantasy books should filmmakers tackle next?...
More from Max's Cool Beans...