industry news
Subscribe Now

Keysight Enables Engineers to Verify, Debug CAN XL and Other Automotive Protocols

New protocol trigger and decode software simplifies development /troubleshooting of various CAN bus systems

SANTA ROSA, Calif. April 21, 2022  — Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that delivers advanced design and validation solutions to help accelerate innovation to connect and secure the world, has released the industry’s first oscilloscope-based automotive protocol trigger/decode solution (D9010AUTP) covering CAN XL (Controller Area Network eXtra Long) that enables engineers to verify and debug low-speed automotive serial bus protocols and simplify the development and troubleshooting of systems including CAN/CAN FD (Flexible Data Rate) and CAN XL.

CAN XL is the third-generation CAN standard in development by the CAN in Automation (CiA) group that improves the well-established CAN FD protocol with increased payload data and faster bit rate. The CAN XL data phase speed is specified to reach 10 Mbps or more, depending on the transceiver capabilities and physical layer components. CAN XL has two modes of operation – fast mode and SIC mode (or slow mode).

Keysight’s automotive decoder software triggers and decodes the SIC mode signal in the arbitration phase, as well as the fast mode signal in the data phase, correctly. It also handles the CAN XL protocols implemented with the CAN HS/FD/SIC transceivers.

“In-vehicle networking technologies play a pivotal role in transmitting data fast and reliably from sensors to AI decision making units, as well as in-between safety relevant electronic control units and electronic systems within the car,” said Thomas Goetzl, vice president and general manager for Keysight’s automotive & energy solutions business unit. “The variety of automotive serial bus standards reflects the diverse needs and requirements of the automotive industry, and Keysight is excited to continue providing industry-first solution offerings that support additional capabilities and use cases.”

Keysight’s D9010AUTP software is compatible with Keysight’s Infiniium oscilloscopes using software version 11.30 or higher for MXR/EXR/UXR models and version 6.72 or higher for other Infiniium scope models enabling users to:

  • Set up the oscilloscope to show CAN, LIN, CAN-FD, CAN XL, FlexRay and SENT protocol decode in less than 30 seconds
  • Gain access to a rich set of integrated protocol-level triggers
  • Save time and eliminate errors by viewing packets at the protocol level
  • Use time-correlated views to quickly troubleshoot serial protocol problems back to their timing or signal integrity root cause

Additional information about Keysight’s Automotive Protocol Trigger and Decode software is available at the Keysight D9010AUTP data sheet.

About Keysight Technologies   

Keysight delivers advanced design and validation solutions that help accelerate innovation to connect and secure the world. Keysight’s dedication to speed and precision extends to software-driven insights and analytics that bring tomorrow’s technology products to market faster across the development lifecycle, in design simulation, prototype validation, automated software testing, manufacturing analysis, and network performance optimization and visibility in enterprise, service provider and cloud environments. Our customers span the worldwide communications and industrial ecosystems, aerospace and defense, automotive, energy, semiconductor and general electronics markets. Keysight generated revenues of $4.9B in fiscal year 2021. For more information about Keysight Technologies (NYSE: KEYS), visit us at www.keysight.com.

Leave a Reply

featured blogs
Mar 4, 2024
The current level of computing power is unprecedented. It has led to the development of advanced computational techniques that enable us to simulate larger systems and predict complex phenomena with greater accuracy. However, the simulation of turbomachinery systems still pos...
Mar 1, 2024
Explore standards development and functional safety requirements with Jyotika Athavale, IEEE senior member and Senior Director of Silicon Lifecycle Management.The post Q&A With Jyotika Athavale, IEEE Champion, on Advancing Standards Development Worldwide appeared first ...
Feb 28, 2024
Would it be better to ride the railways on people-powered rail bikes, or travel to the edge of space in a luxury lounge hoisted by a gigantic balloon?...

featured video

Tackling Challenges in 3DHI Microelectronics for Aerospace, Government, and Defense

Sponsored by Synopsys

Aerospace, Government, and Defense industry experts discuss the complexities of 3DHI for technological, manufacturing, & economic intricacies, as well as security, reliability, and safety challenges & solutions. Explore DARPA’s NGMM plan for the 3DHI R&D ecosystem.

Learn more about Synopsys Aerospace and Government Solutions

featured paper

Reduce 3D IC design complexity with early package assembly verification

Sponsored by Siemens Digital Industries Software

Uncover the unique challenges, along with the latest Calibre verification solutions, for 3D IC design in this new technical paper. As 2.5D and 3D ICs redefine the possibilities of semiconductor design, discover how Siemens is leading the way in verifying complex multi-dimensional systems, while shifting verification left to do so earlier in the design process.

Click here to read more

featured chalk talk

ADI's ISOverse
In order to move forward with innovations on the intelligent edge, we need to take a close look at isolation and how it can help foster the adoption of high voltage charging solutions and reliable and robust high speed communication. In this episode of Chalk Talk, Amelia Dalton is joined by Allison Lemus, Maurizio Granato, and Karthi Gopalan from Analog Devices and they examine benefits that isolation brings to intelligent edge applications including smart building control, the enablement of Industry 4.0, and more. They also examine how Analog Devices iCoupler® digital isolation technology can encourage innovation big and small!  
Mar 14, 2023
40,443 views