industry news
Subscribe Now

Imec’s novel ultra-wideband transceiver combines best-ranging precision with record low power consumption

6-9GHz IEEE 802.15.4z compliant IR-UWB transceiver achieves a groundbreaking 1.4mm ranging precision, while merely consuming 8.7mW/21mW in continuous Tx/Rx mode

LEUVEN (Belgium), JUNE 9, 2023 At this week’s VLSI Technology Symposium, imec, a world-leading research and innovation hub in nanoelectronics and digital technologies, presents a pioneering IEEE 802.15.4z compliant impulse radio (IR) ultra-wideband (UWB) transceiver for high-precision ranging. Building on a cost-efficient silicon implementation, imec’s transceiver chip accomplishes a 1.4mm ranging precision and comes with record low power consumption. As such, it paves the way for a variety of innovative (automotive) applications. One use case includes the creation of UWB radar-on-chip systems for in-cabin (child) presence detection, and driver monitoring.

IR-UWB technology is an enabler of multiple automotive, smart industry, smart home, and IoT use cases – thanks to its ranging and localization capabilities. It comes with the ability to locate assets in warehouses, hospitals, and factories with centimeter precision – and helps people navigate large spaces, like airports and shopping malls. One of IR-UWB’s main differentiators is that it largely outperforms narrowband technologies (such as Bluetooth) in terms of ranging precision. On the downside, it uses more complex and expensive circuits and typically exhibits higher power dissipation.

Imec’s UWB transceiver chip combines best-ranging precision with lowest power consumption

“With the presentation of our UWB transceiver chip, imec overcomes yet another hurdle to UWB’s widespread adoption. Building on a cost-efficient silicon layout, the transceiver achieves the best-ranging precision with the lowest power consumption among state-of-the-art IEEE 802.15.4z radios,” stated Christian Bachmann, program director of wireless sensing at imec. 

Fabricated in 28nm CMOS technology and occupying a silicon area of 1.33mm², imec’s 6 to 9GHz IEEE 802.15.4z compliant IR-UWB 3Rx-1Tx transceiver comes with a ranging precision down to 1.4mm. While this outperforms competitive approaches by several orders of magnitude, it does not come at the expense of a larger power budget – as the transceiver chip merely consumes 8.7mW/21mW in continuous Tx/Rx mode. It also meets UWB’s tight international spectral emission regulations with sufficient margin.

The chip’s record low power consumption results from a highly optimized, low-power and interference-resilient Rx architecture, coupled with an innovative digital polar transmitter architecture. A distributed, two-stage all-digital PLL allows for further reduction of the chip’s power consumption and contributes to a reduced measurement time for localization. To improve its ranging performance (while complying with spectrum regulations), the system makes use of an analog finite impulse response (FIR)-based Tx pre-emphasis approach for more advanced, flexible pulse shaping. 

Laying the foundation of UWB radar-on-chip systems

Christian Bachmann: “Imec is renowned for its pioneering research in the field of UWB technology. Recent achievements include the development of the world’s first sub-5mW UWB transmitter chip for the IEEE 802.15.4z standard in 2021 and the unveiling of a UWB radio capable of supporting data rates of up to 1.66Gb/s (for high data rate, low-power applications) in 2022.”

“Yet, going forward, industry requires high-performance, low-power UWB transceivers that can support a multitude of use cases. So that is what we are presenting today. We believe this chip could ultimately support a whole new generation of UWB use cases, combining UWB ranging, communications and radar functionality. It is a technology that could find its way into automotive applications such as in-cabin presence detection, and driver monitoring – both of which stand or fall with the measurement accuracy and energy efficiency of the underlying technology,” he added. 

To facilitate the commercialization of its technological breakthroughs, imec conducts its research in collaboration with a wide range of industrial partners. One of those partners in the UWB domain is CEVA, the leading licensor of wireless connectivity and smart sensing technologies.

“CEVA fully endorses imec’s belief in the massive potential of UWB in a wide variety of applications, including demanding automotive applications such as in-cabin radar for child presence detection. Teaming up with imec in the UWB realm enables us to offer a complete solution to accelerate the time to market for our joint customers, leading the way in the era of connected devices and smart industries,” added Tal Shalev, Vice President and General Manager, of the Wireless IoT BU at, CEVA. “CEVA’s UWB 802.15.4z modem plus CCC/FiRa MAC has low power, low latency and a high-precision ranging architecture that perfectly complements imec’s novel UWB transceiver”.

About imec

Imec is a world-leading research and innovation center in nanoelectronics and digital technologies. Imec leverages its state-of-the-art R&D infrastructure and its team of more than 5,500 employees and top researchers, for R&D in advanced semiconductor and system scaling, silicon photonics, artificial intelligence, beyond 5G communications and sensing technologies, and in application domains such as health and life sciences, mobility, industry 4.0, agrofood, smart cities, sustainable energy, education, … Imec unites world-industry leaders across the semiconductor value chain, Flanders-based and international tech, pharma, medical and ICT companies, start-ups, and academia and knowledge centers. Imec is headquartered in Leuven (Belgium), and has research sites across Belgium, in the Netherlands and the USA, and representation in 3 continents. In 2022, imec’s revenue (P&L) totaled 846 million euro.

Leave a Reply

featured blogs
May 8, 2024
Learn how artificial intelligence of things (AIoT) applications at the edge rely on TSMC's N12e manufacturing processes and specialized semiconductor IP.The post How Synopsys IP and TSMC’s N12e Process are Driving AIoT appeared first on Chip Design....
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...

featured video

Introducing Altera® Agilex 5 FPGAs and SoCs

Sponsored by Intel

Learn about the Altera Agilex 5 FPGA Family for tomorrow’s edge intelligent applications.

To learn more about Agilex 5 visit: Agilex™ 5 FPGA and SoC FPGA Product Overview

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

It’s the little things that get you; Light to Voltage Converters
In this episode of Chalk Talk, Amelia Dalton and Ed Mullins from Analog Devices chat about the what, where, and how of photodiode amplifiers. They discuss the challenges involved in designing these kinds of components, the best practices for analyzing the stability of photodiode amplifiers, and how Analog Devices can help you with your next photodiode amplifier design.
Apr 22, 2024
3,652 views