industry news
Subscribe Now

Command The 5G Network: VIAVI Streamlines 5G and 4G Deployment and Maintenance with OneAdvisor-800 Enhancements

All-in-one tool enables efficient installation and maintenance of 5G NR and legacy 4G-LTE cell sites

San Jose, Calif., November 10, 2020 – Viavi Solutions Inc. (VIAVI) (NASDAQ: VIAV) today announced enhancements to the VIAVI OneAdvisor-800 all-in-one tool to streamline cell site maintenance of 5G and 4G technologies. With the addition of 5G NR and 4G LTE signal analyzer functionality to the award-winning OneAdvisor-800, field technicians can efficiently deploy, integrate and troubleshoot today’s multi-technology networks with a single instrument.

Even as communications service providers (CSPs) face mounting pressure to deliver on the promise of 5G, demand still exists to maintain and deploy essential LTE services. The VIAVI OneAdvisor-800 consolidates all key 5G and 4G cell site installation and integration tests, with support for fiber, coaxial cable, PIM detection, fronthaul, and spectrum/signal analysis. In addition to the efficiency of an all-in-one device, built-in automated workflows guide technicians through each test process and automatically store test results, further streamlining cell site certification and optimization. 

Key Features

  • 5G NR Signal Analyzer: Comprehensive signal analysis measurements for 5G, including beam analysis and carrier scanner for single or multiple 5G channel verification.
  • 4G LTE Signal Analyzer: One-button testing for standards-based RF channel power, over-the-air channel scanner and ID scanner verifying LTE-FDD/LTE-TDD signal performance, allowing faster validation and troubleshooting.
  • EMF Signal Analyzer: Electromagnetic field testing in spectral format and in the 5G beam analysis method, effectively assessing the amount of energy emissions from 5G active antenna based radios.
  • DSS Signal Analyzer:  Concurrent signal analysis of 5G NR and 4G LTE signals transmitted on shared spectrum to quickly Identify service availability and performance issues. 

“Heightened demand for 5G has translated into a sharp rise in the number of field technicians and contractors needed to deploy, activate and maintain tens of thousands of cell sites worldwide. With the automated VIAVI OneAdvisor-800 tool, new technicians become proficient with greatly reduced risk of error, and experienced technicians can work more quickly and accurately,” said Kevin Oliver, Vice President and General Manager, Converged Instruments and Virtual Test, VIAVI. “With the introduction of 5G NR and 4G LTE enhancements to the OneAdvisor-800, VIAVI now offers the most comprehensive test portfolio available for cell site installation, integration and maintenance.”

Join VIAVI at ISE Expo 2020 in Booth 64902, November 10-11, for a live demonstration of the OneAdvisor-800.

About VIAVI

VIAVI (NASDAQ: VIAV) is a global provider of network test, monitoring and assurance solutions for communications service providers, enterprises, network equipment manufacturers, government and avionics. We help these customers harness the power of instruments, automation, intelligence and virtualization to Command the network. VIAVI is also a leader in light management solutions for 3D sensing, anti-counterfeiting, consumer electronics, industrial, automotive, and defense applications. Learn more about VIAVI at www.viavisolutions.com. Follow us on VIAVI Perspectives, LinkedIn, Twitter, YouTube and Facebook.

 

Leave a Reply

featured blogs
Nov 24, 2020
The ICADVM20.1 and IC6.1.8 ISR15 production releases are now available for download at Cadence Downloads . For information on supported platforms and other release compatibility information, see the... [[ Click on the title to access the full blog on the Cadence Community si...
Nov 23, 2020
It'€™s been a long time since I performed Karnaugh map minimizations by hand. As a result, on my first pass, I missed a couple of obvious optimizations....
Nov 23, 2020
Readers of the Samtec blog know we are always talking about next-gen speed. Current channels rates are running at 56 Gbps PAM4. However, system designers are starting to look at 112 Gbps PAM4 data rates. Intuition would say that bleeding edge data rates like 112 Gbps PAM4 onl...
Nov 20, 2020
[From the last episode: We looked at neuromorphic machine learning, which is intended to act more like the brain does.] Our last topic to cover on learning (ML) is about training. We talked about supervised learning, which means we'€™re training a model based on a bunch of ...

Featured video

Synopsys and Intel Full System PCIe 5.0 Interoperability Success

Sponsored by Synopsys

This video demonstrates industry's first successful system-level PCI Express (PCIe) 5.0 interoperability between the Synopsys DesignWare Controller and PHY IP for PCIe 5.0 and Intel Xeon Scalable processor (codename Sapphire Rapids). The ecosystem can use the companies' proven solutions to accelerate development of their PCIe 5.0-based products in high-performance computing and AI applications.

More information about DesignWare IP Solutions for PCI Express

featured paper

Overcoming PPA and Productivity Challenges of New Age ICs with Mixed Placement Innovation

Sponsored by Cadence Design Systems

With the increase in the number of on-chip storage elements, it has become extremely time consuming to come up with an optimized floorplan using manual methods, directly impacting tapeout schedules and power, performance, and area (PPA). In this white paper, learn how a breakthrough technology addresses design productivity along with design quality improvements for macro-dominated designs. Download white paper.

Click here to download the whitepaper

Featured Chalk Talk

uPOL Technology

Sponsored by Mouser Electronics and TDK

Power modules are a superior solution for many system designs. Their small form factor, high efficiency, ease of design-in, and solid reliability make them a great solution in a wide range of applications. In this episode of Chalk Talk, Amelia Dalton chats with Tony Ochoa of TDK about the new uPOL family of power modules and how they can deliver the power in your next design.

Click here for more information about TDK FS1406 µPOL™ DC-DC Power Modules