industry news
Subscribe Now

80V Synchronous Four Quadrant DC/DC Controller with Bipolar Output Seamlessly Sources or Sinks up to 5A

MILPITAS, CA – December 10, 2015 – Linear Technology Corporation announces the LT8714, an 80V input synchronous PWM four quadrant output DC/DC controller. This device cleanly transitions the output voltage through zero volts with up to 5A sourcing and sinking current capability, regardless of the output voltage polarity, making it ideal for regulating to positive, negative, or zero volts. The bipolar output enables the LT8714 to source or sink current, regardless of the output voltage polarity. Applications include bidirectional current sources, test systems, high power low frequency signal amplification, back body biasing, thermoelectric coolers (TECs) and electronic window tinting.

The LT8714 operates over a 4.5V to 80V input voltage range and produces an output voltage that is dependent on the choice of external components. This device can operate as a power source and as a load irrespective of the voltage polarity. Its rail-to-rail output current monitor and control enables the device to be configured as a current source. The LT8714 features an innovative EN pin function that enables slowly varying input signals. A voltage on the control pin externally sets the output voltage.

The fixed operating frequency, selectable from 100kHz to 750kHz, can be synchronized to an external clock. The LT8714 incorporates a power good output signal to indicate if the output voltage is above or below its target regulation voltage. Current mode control provides excellent line and load regulation. Additional features include overcurrent protection, undervoltage lockout and soft-start.

The LT8714 is available in a 20-lead TSSOP package, priced starting at $3.65 each in 1,000-piece quantities. For more information, visit www.linear.com/product/LT8714.

Summary of Features: LT8714 

  • Seamless Four Quadrant DC/DC Converter
  • Bipolar Output Sources or Sinks Current Regardless if Output is Positive or Negative
  • Bidirectional Applications
  • Synchronous Rectification
  • Wide 4.5V to 80V Input Voltage Range
  • Rail-to-Rail Output Current Monitor & Control
  • Up to 5A Output Current
  • Fixed Operating Frequency from 100kHz to 750kHz
  • Synchronizable to an External Clock
  • Control Pin Sets Output Voltage
  • Forced Continuous or Discontinuous Mode
  • 20-Lead TSSOP Package

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 26, 2024
LEGO ® is the world's most famous toy brand. The experience of playing with these toys has endured over the years because of the innumerable possibilities they allow us: from simple textbook models to wherever our imagination might take us. We have always been driven by ...
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

IoT Data Analysis at the Edge
No longer is machine learning a niche application for electronic engineering. Machine learning is leading a transformative revolution in a variety of electronic designs but implementing machine learning can be a tricky task to complete. In this episode of Chalk Talk, Amelia Dalton and Louis Gobin from STMicroelectronics investigate how STMicroelectronics is helping embedded developers design edge AI solutions. They take a closer look at the benefits of STMicroelectronics NanoEdge-AI® Studio and  STM32Cube.AI and how you can take advantage of them in your next design. 
Jun 28, 2023
34,706 views