industry news
Subscribe Now

92mW Direct Conversion I/Q Modulator Has Better than 50dB Sideband & Carrier Suppression

MILPITAS, CA – August 11, 2014 – A new low power I/Q modulator from Linear Technology enables battery-powered transmitters operating in the 30MHz to 1.3GHz frequency bands, breaking new ground in power consumption, sideband suppression, carrier leakage and dynamic range performance.

The LTC5599 modulator, powered from a single 2.7V to 3.6V supply, draws only 28mA current, less than 60% that of alternative solutions-with no performance sacrifice. The LTC5599 delivers outstanding native -52.6dBc sideband suppression and -51.5dBm carrier leakage without calibration. With on-chip calibration resources, performance can be further improved to -60dBc and -65dBm, respectively. Moreover the device output achieves an excellent noise floor of -156dBm/Hz with an OIP3 of 20.8dBm, delivering superior transmitter performance.

The LTC5599 combines low power consumption and robust performance to suit a wide range of demanding battery-powered radios and wireless communications applications that are exposed to strong radio interference. These include wireless professional microphones, frequency hopping narrowband and broadband portable field radios, public safety radios, train communications, as well as broadband VHF/UHF white space modems, software-defined radios, portable RF test equipment, picocell base stations, low-power microwave backhaul, small wireless repeaters and satellite modems.

The device’s gain can be set via the on-chip serial port. A coarse gain control provides 1dB/step, along with adjustable fine gain control of 0.1dB. Total gain ranges from -19dB to 0dB. Varying the modulator gain enables device supply current from 8mA to 35mA, allowing the device to be set to lower power consumption with slightly reduced gain and performance, as needed for specific applications. Once set, the gain can be automatically temperature compensated by activating the on-chip temperature correction feature.

The LTC5599 supports narrowband and wideband radio applications. Its I and Q inputs are each capable of -1dB modulation bandwidth of up to 37MHz, supporting a total of 74MHz RF bandwidth at 900MHz frequency.

The LTC5599 is available in a 4mm x 4mm QFN package, providing a compact footprint. The product is specified for case operating temperature from -40°C to 105°C, supporting reliable operation in extended temperature environments. The device can be conveniently shut down with an enable control pin. When disabled, the device conserves power by drawing a typical of 0.7µA standby current. The LTC5599, priced starting at $4.45 each in 1,000-pieces quantities, is available immediately in production quantities. For more information, visitwww.linear.com/product/LTC5599.

Summary of Features: LTC5599

  • Operating Frequency: 
    30MHz to 1.3GHz
  • Power Consumption:
    3.3V / 28mA
  • Sideband Suppression:
    -52.6dBc at 500MHz
  • Carrier Leakage:
    -51.5dBm at 500MHz
  • Output IP3: +20.8dBm
  • Output IP2: +63.6dBm
  • Output Noise Floor:
    -156dBc/Hz at POUT = 3dBm
  • SPI Serial Bus Control:
    • Adjustable Gain:
      -19dB to 0dB in 1dB Steps
    • Gain Changes Affect Supply Current from 8mA to 35mA
    • I/Q Gain/Phase Adjust:
      Up to -60dBc Sideband Suppression
    • I/Q Offset Adjust:
      Up to -65dBm Carrier Leakage

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products.

For more information, visit www.linear.com. , LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Industrial Drives and Pumps -- onsemi and Mouser Electronics
Sponsored by Mouser Electronics and onsemi
In this episode of Chalk Talk, Amelia Dalton and Bob Card and Hunter Freberg from onsemi discuss the benefits that variable frequency drive, semiconductor optimization, and power switch innovation can bring to industrial motor drive applications. They also examine how our choice of isolation solutions and power packages can make a big difference for these kinds of applications and how onsemi’s robust portfolio of intelligent power modules, current sensing solutions and gate drivers are a game changer when it comes to industrial motor drive applications.
Mar 25, 2024
4,599 views