industry news
Subscribe Now

Blu Wireless Technology and Bristol University demonstrate millimetre wave at Small Cells World Summit

Wireless data connections that exploit millimetre wave radio spectrum (30GHz to 300GHz) are expected to be used in worldwide 5G networks from 2020.  Bristol start-up Blu Wireless Technology (BWT) has partnered with The University of Bristol’s Communication Systems and Networks research group to develop this technology and they will demonstrate their innovative work at the Small Cells World Summit in London this week [10-12 June].

Millimetre wave radios use much higher carrier frequencies than those in current systems, such as 4G and Wi-Fi.  The University and BWT radios transmit data approximately 50 times faster than the 2.4GHz Wi-Fi standard.  At 60GHz there is significantly more unallocated spectrum, and this opens up the possibility of multi-Gigabit data rates to future mobile terminals.

The challenge at 60GHz is how to overcome the additional signal losses. If transmit powers and antenna gains were equal, at 60GHz the received signal would be 1000x weaker than a Wi-Fi signal. To address this challenge, millimetre wave systems need electronically steered high gain antennas to track users as they move within the network.

A demonstration of results from the first phase of work, supported through the West of England Local Enterprise Partnership Regional Growth Fund, will be showcased for the first time at the summit to be held at ExCel London.

Using a newly developed virtual network simulator the team will show how antenna beam steering supports robust point-to-point connections up to 400 metres. For 5G mobile access, the team will demonstrate multi-gigabit beamforming and mobile tracking up to 100 metres from the base station. In both cases beam forming is shown to overcome the harmful effects of blocking trees and buses.

Henry Nurser, CEO at Blu Wireless Technology, explained: “BWT has developed the Gigabit Digital Baseband necessary for millimetre wave communications to enter the mass market. At the Small Cells World Summit we’re presenting some of the details behind our innovative system-level solutions, how this can be applied to solve the TCO problems associated with backhaul for small cells and why Europe needs to re-think regulations for outdoor 60GHz networks.”

Mark Beach, Professor of Radio Systems Engineering, Department of Electrical and Electronic Engineering, said: “This technology builds on a wealth of knowledge and expertise over the last 25 years in Smart Antenna systems and an in-depth understanding of radiowave propagation. Our rich mix of fundamental research and practical validation at Bristol makes us an ideal partner for industrially relevant projects such as this.”

Andrew Nix, Professor of Wireless Communication Systems and Head of the, Department of Electrical and Electronic Engineering, added: “Our sophisticated ray tracing tools have been combined with the University’s high performance computing facilities to enable the rapid analysis of complex millimetre wave systems. In particular, our simulators combine detailed channel models with antenna arrays and beam tracking algorithms to dynamically determine user performance in a virtual network.”

For more than 20 years academics from the University of Bristol have played a key role in the development of wireless communications and in particular, they have contributed to the development of today’s Wi-Fi and cellular standards.

Leave a Reply

featured blogs
Apr 26, 2024
LEGO ® is the world's most famous toy brand. The experience of playing with these toys has endured over the years because of the innumerable possibilities they allow us: from simple textbook models to wherever our imagination might take us. We have always been driven by ...
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Nexperia Energy Harvesting Solutions
Sponsored by Mouser Electronics and Nexperia
Energy harvesting is a great way to ensure a sustainable future of electronics by eliminating batteries and e-waste. In this episode of Chalk Talk, Amelia Dalton and Rodrigo Mesquita from Nexperia explore the process of designing in energy harvesting and why Nexperia’s inductor-less PMICs are an energy harvesting game changer for wearable technology, sensor-based applications, and more!
May 9, 2023
41,081 views