industry news
Subscribe Now

Flyback Synchronous Rectifier Driver Provides 10A Output Current

MILPITAS, CA – March 3, 2014 – Linear Technology Corporation announces the LT8309, a flyback secondary-side synchronous rectifier driver that replaces the output diode with a MOSFET, allowing up to 10A output current without the use of a heat sink. The maximum output current of a flyback power supply has been limited by the power loss and heat generated from the output diode when no heat sink is used. The LT8309 replaces the diode forward voltage drop with the RDS(ON) of an external N-channel MOSFET, thereby reducing the power loss, increasing converter efficiency and easing the thermal design.

Most prior solutions use a signal transformer driven from the primary-side to control the synchronous rectifier; however the LT8309 senses the drain-to-source voltage of the MOSFET for activation. This technique not only eliminates a transformer, but allows the LT8309 to work with Linear Technology’s growing line of no-opto-coupler products required for output voltage feedback boundary conduction mode (BCM)/critical conduction mode (CrCM) flyback converters, making it highly versatile for many types of applications.

The LT8309 operates from a 4.5V to 40V input voltage range. Its 500µA quiescent current maximizes light load efficiency. The strong 1? pull-down gate driver provides fast device turn-off and its low minimum on- and off-times improve noise immunity. Additional features include a mere 22ns propagation delay, adjustable and accurate trip voltage along with the ability to drive 150V rated MOSFETs.

The LT8309 is available in a SOT-23 package. Pricing starts at $1.82 each in 1,000-piece quantities. For more information, visit www.linear.com/product/LT8309.

Summary of Features: LT8309

  • Synchronous Rectification
  • High Output Current – Up to 10A
  • Higher Efficiency & Better Thermal Performance
  • Works with BCM/CrCM Architectures
  • Wide 4.5V to 40V Input Voltage Range
  • Supports Up to 150V MOSFETs
  • 22ns Turn-Off Propagation Delay
  • Accurate Minimum On- & Off-Times for Reliable Operation
  • Adjustable & Accurate Trip Point:
    -5mV to -30mV
  • 1 Ohm Gate Driver Pull-Down
  • SOT23 5-Lead Package

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visit www.linear.com.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Why Wiwynn Energy-Optimized Data Center IT Solutions Use Cadence Optimality Explorer

Sponsored by Cadence Design Systems

In the AI era, as the signal-data rate increases, the signal integrity challenges in server designs also increase. Wiwynn provides hyperscale data centers with innovative cloud IT infrastructure, bringing the best total cost of ownership (TCO), energy, and energy-itemized IT solutions from the cloud to the edge.

Learn more about how Wiwynn is developing a new methodology for PCB designs with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Miniaturization Impact on Automotive Products
Sponsored by Mouser Electronics and Molex
In this episode of Chalk Talk, Amelia Dalton and Kirk Ulery from Molex explore the role that miniaturization plays in automotive design innovation. They examine the transformational trends that are leading to smaller and smaller components in automotive designs and how the right connector can make all the difference in your next automotive design.
Sep 25, 2023
26,982 views