industry news
Subscribe Now

60V Multiphase Synchronous Boost Controller Delivers High Currents with 97% Efficiency

MILPITAS, CA – February 19, 2014 – Linear Technology Corporation announces the LTC3784, a high power two phase single output synchronous step-up DC/DC controller that replaces rectifying boost diodes with high efficiency N-channel MOSFETs. This device can produce a 24V output at 10A from a 12V input at up to 97% efficiency without any heat sink. The LTC3784 operates from an input voltage ranging from 4.5V to 60V during start-up, maintains operation down to 2.3VIN after start-up and can regulate an output voltage as high as 60V.

When configured for Burst Mode® operation, the LTC3784’s 28µA quiescent current makes it ideal for “Always-on” automotive applications to extend battery run-time during standby mode while keeping the output voltage in regulation. The powerful 1.2 Ohm onboard N-channel MOSFET gate drivers are capable of slewing large MOSFETs quickly. The device’s current mode architecture, clock output and phase modulation enable easy paralleling of multiple devices for up to 12-phase operation for very high power applications. The LTC3784 has a phase-lockable switching frequency from 75kHz to 850kHz or a selectable fixed frequency from 50kHz to 900kHz. In addition, this device features adjustable cycle-by-cycle current limit and can use a sense resistor or the voltage drop across the inductor (DCR) for current sensing. In keep alive applications where the input voltage may exceed the regulated output voltage, the LTC3784 allows the synchronous MOSFET to be kept on continuously so that the output voltage follows the input voltage with minimal power loss. Furthermore, the LTC3784 has adjustable soft-start, a power good output and maintains ±1% reference voltage accuracy over an operating junction temperature range of -55°C to 150°C (MP grade).

The LTC3784 is available in SSOP-28 and 4mm x 5mm QFN-28 packages. The LTC3784E and LTC3784I versions operate from a -40°C to 125°C junction temperature. The LTC3784H grade is guaranteed to operate from a -40°C to 150°C operating junction temperature. The LTC3784MP is guaranteed to operate over a -55°C to 150°C operating junction temperature range. The 1,000-piece price starts at $3.76 each. For more information, visitwww.linear.com/product/LTC3784.

Summary of Features: LTC3784

  • Wide VIN Range from 4.5V to 60V, Maintains Operation down to 2.3V after Start-Up
  • Up to 60V VOUT Operation
  • Low 28µA Quiescent Current Regulating VOUT at no load
  • Powerful 1.2 Ohm Gate Drivers
  • Up to 97% Efficiency
  • 100% Duty Cycle Capability for Synchronous MOSFET
  • Phase-Lockable Frequency from 75kHz to 850kHz
  • Programmable Fixed Frequency from 50kHz to 900kHz
  • RSENSE or Inductor DCR Current Sensing
  • Current Mode Control
  • ±1% Reference Voltage Accuracy over -55°C to +150°C
  • Programmable Soft-Start
  • Phase Modulation for up to 12 Phases
  • Power Good Output
  • Extended & Industrial Grades: -40°C to 125°C Operating Junction Temp
  • Automotive Temp Grade: -40°C to 150°C Operating Junction Temp
  • Military Temp Grade: -55°C to 150°C Operating Junction Temp

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
May 8, 2024
Learn how artificial intelligence of things (AIoT) applications at the edge rely on TSMC's N12e manufacturing processes and specialized semiconductor IP.The post How Synopsys IP and TSMC’s N12e Process are Driving AIoT appeared first on Chip Design....
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...

featured video

Introducing Altera® Agilex 5 FPGAs and SoCs

Sponsored by Intel

Learn about the Altera Agilex 5 FPGA Family for tomorrow’s edge intelligent applications.

To learn more about Agilex 5 visit: Agilex™ 5 FPGA and SoC FPGA Product Overview

featured paper

Achieve Greater Design Flexibility and Reduce Costs with Chiplets

Sponsored by Keysight

Chiplets are a new way to build a system-on-chips (SoCs) to improve yields and reduce costs. It partitions the chip into discrete elements and connects them with a standardized interface, enabling designers to meet performance, efficiency, power, size, and cost challenges in the 5 / 6G, artificial intelligence (AI), and virtual reality (VR) era. This white paper will discuss the shift to chiplet adoption and Keysight EDA's implementation of the communication standard (UCIe) into the Keysight Advanced Design System (ADS).

Dive into the technical details – download now.

featured chalk talk

One Year of Synopsys Cloud: Adoption, Enhancements and Evolution
Sponsored by Synopsys
The adoption of the cloud in the design automation industry has encouraged innovation across the entire semiconductor lifecycle. In this episode of Chalk Talk, Amelia Dalton chats with Vikram Bhatia from Synopsys about how Synopsys is redefining EDA in the Cloud with the industry’s first complete browser-based EDA-as-a-Service cloud platform. They explore the benefits that this on-demand pay-per use, web-based portal can bring to your next design. 
Jul 11, 2023
35,165 views