industry news
Subscribe Now

40VIN/OUT, 2A Synchronous Buck-Boost DC/DC Converter Offers 2.7V to 40V Input & Output Range

MILPITAS, CA – November 21, 2011 – Linear Technology announces the LTC3115-1, a synchronous buck-boost converter that delivers up to 2A of continuous output current from a wide range of power sources from single-cell Li-Ion to 24V/28V industrial rails to 40V automotive inputs. The LTC3115-1’s 2.7V to 40V input and output range provides a regulated output with inputs above, below or equal to the regulated output. The low noise buck-boost topology incorporated in the LTC3115-1 provides a continuous, jitter-free transition between buck and boost modes, making it ideal for RF and other noise-sensitive applications that must maintain a low-noise constant output voltage with a variable input power source. In many applications, battery run time is significantly extended over step-down only solutions. The LTC3115-1’s switching frequency is user programmable between 100kHz and 2MHz, and can be synchronized to an external clock. Proprietary third generation buck-boost PWM circuitry ensures low noise and high efficiency while minimizing the size of external components. The combination of tiny externals and a 4mm x 5mm DFN or TSSOP-20E package provides a compact solution footprint.

The LTC3115-1 incorporates four internal low RDS(ON) N-channel MOSFETs to deliver efficiencies of up to 95%. User-selectable Burst Mode® operation lowers quiescent current to only 50µA, improving light load efficiency and extending battery run time. For noise-sensitive applications, Burst Mode operation can be disabled. Additional features include internal soft-start, programmable under voltage protection, short circuit protection and output disconnect.

LTC3115EDHD-1 is available in a 16-lead 4mm x 5mm DFN package and the LTC3115EFE-1 is available in a thermally enhanced 20-lead TSSOP package. Pricing starts at $5.35 each and $5.55 each, respectively for 1,000 piece quantities. Industrial grade versions, the LTC3115IDHD-1 and LTC3115IFE-1, are guaranteed to operate over the -40°C to 125°C operating junction temperature range and are priced at $5.89 and $6.11 each, respectively, in  1,000-piece quantities. All versions are available from stock. For more information, visit www.linear.com/product/LTC3115-1.

Summary of Features: LTC3115-1

  • 40V, 2A, Synchronous Buck-Boost Regulator
  • Wide VIN Range: 2.7V to 40V
  • Wide VOUT Range: 2.7V to 40V
  • 1A Output Current for VIN ≥ 3.6V,VOUT = 5V
  • 2A Output Current in Step-Down 
    Operation for VIN ≥ 6V
  • Programmable Frequency:100kHz to 2MHz
  • Supports Synchronization with an External Clock
  • Up to 95% Efficiency
  • 50µA Burst Mode® Quiescent Current
  • Ultralow Noise Buck-Boost PWM
  • Internal Soft-Start
  • 3µA Supply Current in Shutdown
  • Programmable Input Undervoltage Lockout
  • Small 4mm x 5mm x 0.75mm DFN Package
  • Thermally Enhanced 20-Lead TSSOP Package

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, and µModule® subsystems.

LT, LTC, LTM, µModule, Burst Mode and  are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

OPTIGA™ TPM SLB 9672 and SLB 9673 RPI Evaluation Boards
Sponsored by Mouser Electronics and Infineon
Security is a critical design concern for most electronic designs today, but finding the right security solution for your next design can be a complicated and time-consuming process. In this episode of Chalk Talk, Amelia Dalton and Andreas Fuchs from Infineon investigate how Infineon’s OPTIGA trusted platform module can not only help solve your security design concerns but also speed up your design process as well.
Jun 26, 2023
34,946 views