feature article
Subscribe Now

GreenPeak launches three new chips for the RF4CE market

Utrecht, Netherlands 3 January 2011 GreenPeak Technologies, a leading fabless semiconductor company, today announced the launch of three new chips, allowing the development of robust and low cost ZigBee RF4CE remote control applications for TVs and set-top boxes, addressing an overall one billion unit annual market.

The three devices all have full RF4CE functionality with ZRC embedded, targeting specific product applications:

  •        GP520: front-panel controller for set-top box with SPI/TWI interface
  •        GP530: front-panel controller for TV with UART interface
  •        GP540: complete, low-cost remote control on a chip including embedded keyboard scanner and full IR functionality

All devices are optimized for low cost, ease of integration and allow fast time-to-market by only requiring a simple configuration step to achieve a complete RF4CE ZRC-compliant end product.

Bringing the complete RF4CE functionality for each application into a single device makes low cost and reliable RF remote controls a reality, said Cees Links, CEO of GreenPeak Technologies. This new series of RF4CE chips brings the cost of the total solution down and makes the choice for RF remote controls even easier. GreenPeak provides a streamlined one-stop-shop offering for RF4CE chips. The integration of advanced RF4CE configurability provides simplicity of integration bringing the development and integration time down to virtually zero.

GreenPeaks unique ultra low power and synchronization optimized for remote controls enables single coin cell battery operation for ten years or more. It also enables advanced thin remote control designs not requiring a battery lid and it implements find-me and push functionality.

GreenPeak also takes Wi-Fi coexistence one step further. The GreenPeak RF4CE chips offer an additional 30dB (1000x) better interference robustness against Wi-Fi, Bluetooth and other RF signals, which is the result of a superior radio design with antenna diversity technology. This patented technology uses two separate antennas to avoid the typical in-door wave cancellation, essential when more TVs and set-top boxes will be equipped with Wi-Fi internet connections.

Much better than IR (infra-red) based remote controls, RF remote controls provide two-way high-speed communication and do not require line of sight as the radio signal transmits through cabinets, obstacles, walls and floors. A ZigBee RF4CE remote control system(compliant with the IEEE 802.15.4 standard, operating in the 2.4GHz global frequency band) is faster, more reliable, includes richer, bi-directional communication and provides a greater range compared to traditional IR remote controls. 

For more information, please visit the GreenPeak booth at International CES 2011 Las Vegas 6-9 January 2011 South Hall 1-21418 in the ZigBee Pavilion or make an appointment with our sales team.

About GreenPeak

GreenPeak Technologies is a fabless semiconductor company and is a leader in highly integrated IEEE 802.15.4/ZigBee RF4CE silicon solutions for consumer electronics.

GreenPeak is headquartered in Utrecht, The Netherlands and has offices in Belgium, Japan and Korea.

GreenPeak is backed by venture capitalists: Gimv (Belgium), DFJ Esprit (UK), Robert Bosch Venture Capital (Germany), Motorola Ventures (USA) and Allegro Investment Fund (Belgium).
For more information, please visit www.greenpeak.com

Leave a Reply

featured blogs
Apr 24, 2026
A thought experiment in curiosity, confusion, and cosmic consequences....

featured paper

Want early design analysis without simulation?

Sponsored by Siemens Digital Industries Software

Traditional verification methods are failing today's complex IC designs, which require a proactive, early-stage analysis approach. A shift-left methodology addresses IP block integration challenges and the limitations of traditional simulation and ERC tools. Insight Analyzer detects hard-to-find leakage issues across power domains, enabling early analysis without full simulation. Identify inefficiencies earlier to reduce rework, improve reliability, and enhance power performance.

Click to read more!

featured chalk talk

Designing Scalable IoT Mesh Networks with Digi XBee® for Wi-SUN
Sponsored by Mouser Electronics and Digi and Silicon Labs
In this episode of Chalk Talk, Quinn Jones from Digi, Chad Steider from Silicon Labs and Amelia Dalton explore how Wi-SUN Micro-Mesh can reduce cost and simplify deployment for your next IoT mesh network. They also investigate the benefits that Digi XBee solutions bring to these types of networks and how you can jump start your next IoT mesh network design with Silicon Labs and Digi.
May 4, 2026
635 views