editor's blog
Subscribe Now

On the Scene: Almost-Instant Semi Quotes with eSilicon

Historically, it has taken months, possibly many months to get a quote for semiconductor production. Lots of paper was involved – maybe a fax machine or two. Getting a MPW quote (in the old days) could be more like dentistry (get it? pulling teeth??!) than semiconductor design. Those days could be long gone if eSilicon has its way. In this episode of On The Scene, I chat with Mike Gianfagna and Bill Isaacson from eSilicon and get a MPW quote completely online and in less than three minutes. Take that fax machine!

Leave a Reply

featured blogs
May 27, 2020
Could life evolve on ice worlds, ocean worlds, ocean worlds covered in ice, halo worlds that are tidally locked with their sun, and rogue worlds without a sun? If so, what sort of life might it be?...
May 26, 2020
I get pleasure from good quality things. Quality is a vague term, but, to me, it is some combination of good design for usability, functionality and aesthetics, along with reliability and durability. Some of these factors can be assessed very quickly; others take time. For ex...
May 26, 2020
#robotcombat #combatrobots #robotwars #WeWantSeason5 #WeGotSeason5 These are some of the most popular hashtags used by a growing number of global BattleBots enthusiasts. Teams from all backgrounds design, build and test robots of all sizes for one purpose in mind: Robot Comba...
May 22, 2020
[From the last episode: We looked at the complexities of cache in a multicore processor.] OK, time for a breather and for some review. We'€™ve taken quite the tour of computing, both in an IoT device (or even a laptop) and in the cloud. Here are some basic things we looked ...

Featured Video

DesignWare 112G Ethernet PHY IP Insertion Loss Capabilities

Sponsored by Synopsys

This video shows the performance results of the Synopsys 112G PHY receiver to varying amounts of channel insertion loss. The IP meets the standards requirements. With leading power, performance, and area, the IP is available in a range of FinFET processes for high-performance.

Click here for more information

Featured Paper

How to Measure the Power Supply Rejection Ratio for LDOs

Sponsored by Maxim Integrated

Noise on power supplies typically propagates to the output and is typically unwanted in applications like precision measurement and RF communication. LDOs reject AC noise based on their power-supply rejection ratio (PSRR). PSRR is a function of noise frequency and input-to-output voltage difference & its values are not consistently presented in manufacturers' data sheets. This app note shows the steps to determine the PSRR of Maxim's MAX38902A/B, equipping readers to perform their own PSRR measurements.

Click here to download the whitepaper