industry news
Subscribe Now

VadaTech announces the AMC583 and FMC250

Henderson, NV – July 13, 2017 – VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the AMC583 dual FMC+ carrier and FMC250 ADC/DAC FMC+ module. By increasing the number of SERDES lanes available, FMC+ carriers and modules support higher I/O bandwidth, making improved use of the latest JESD204B-enabled signal conversion products.

The AMC583 is an FPGA Dual FMC+ Carrier with Kintex UltraScale™ XCKU115 and P2040. The double-module AMC provides a very capable I/O processing engine, with a large UltraScale™ FPGA coupled to two FMC+ sites and supported by an on-board quad-core P2040 processor. The XCKU115 FPGA has over 5,500 DSP slices and is supported by 8 GB of DDR4 (over two banks each 32-bits wide). The dual FMC+ sites on the AMC583 accept FMCs from VadaTech’s extensive range of data acquisition, networking and RF units, and other 3rd party VITA-57.4 compliant modules.

The FMC250 utilizes dual AD9625 ADCs providing 12-bit conversion rates of up to 2.6 GSPS and a single DAC (AD9162 or AD9164) providing 16-bit conversion rate of up to 12 GSPS. The analog input, digital output, clock and trigger interfaces of the FMC250 are routed via SSMC connectors. The internal clock frequency is programmable and the clock is capable of locking to an external reference.
MicroTCA provides a powerful and flexible alternative to VPX for cost-sensitive and SWAP-constrained applications.

About VadaTech

VadaTech provides innovative embedded computing solutions from board-level products, chassis-level platforms, to configurable application-ready systems. With a focus on AdvancedTCA, MicroTCA, VPX and PCIe solutions, the company offers unmatched product selection and expertise. A unique combination of electrical, mechanical, software, and system-level expertise, enables VadaTech to provide customized commercial or rugged computing solutions to meet the most complex customer requirements. VadaTech also offers specialized product solutions for VME, CompactPCI, and other architectures. A member of PICMG and VITA, VadaTech has headquarters, design and manufacturing facilities in Henderson, NV with design, support and sales offices in Europe and Asia Pacific.

Leave a Reply

featured blogs
Mar 20, 2018
One of the presentations on the opening day of SEMICON China, here in Shanghai, was by Rick Wallace, who is the CEO of KLA-Tencor (KT). He started by pointing out that KT have been selling for the entire history of the industry, so he thought it would be good to give a perspe...
Mar 19, 2018
This is another in my occasional series of postings, where I give a few little tips that may be of benefit to the embedded software developer. I endeavor to address all aspects of embedded software: general programming, C, C++, system design and operating systems. Questions a...
Mar 16, 2018
MICRO RUGGED CONNECTORS Most designers think the smaller the connector, the more fragile and delicate it is.  We don'€™t usually think of micro pitch connectors as being rugged, as being able to handle high mating cycles, or as having robust mechanical strength on the PCB,...
Mar 5, 2018
Next-generation networking solutions are pushing processing out of the cloud and towards the network'€™s edge. At the same time, processing structures architected around programmable logic provide the ability to make computing much more data-centric. Programmable logic make...