industry news
Subscribe Now

VadaTech Announces new Xilinx UltraScale+TM XCZU15EG FPGA Carrier Boards (In both AMC and 3U VPX)

Henderson, NV – July 27, 2018 – VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces two new products based on the Xilinx Zynq® UltraScale+™ MPSoC (MultiProcessor System on Chip).

The AMC581 is an AMC FPGA Carrier with a single FMC (VITA 57) site and is compliant to AMC.1, AMC.2 and AMC.4 specifications. The on-board re-configurable FPGA interfaces directly to the AMC FCLKA, TCLKA-D, FMC DP0-9 and all FMC LA/HA/HB pairs. The FPGA interfaces to a single DDR4 memory channel (64-bit wide) for local data storage. The module has on board 64 GB of Flash, 128 MB of boot flash and an SD Card as an option.

The VPX581 is a 3U VPX FPGA Carrier with the same base architecture, making it easy for developers to port between these two embedded computing form factors. The unit includes a dedicate Health Management processor for use with Chassis Management solutions supporting VITA 46.11 Tier-2 command set and is compatible with a chassis having JTAG Switch Module (JSM).

Both modules are based on Xilinx UltraScale+TM XCZU15EG MPSoC FPGA which provide 3,528 DSP Slices and 746k logic cells. The XCZU15EG includes a quad-core ARM application processor, dual-core ARM real-time processor and Mali™ graphics processing unit, as well as, over 26 Mb of block RAM and 31 Mb of UltraRAM. The device is aimed at applications such as situational awareness, secure networking and machine vision.

About VadaTech

VadaTech provides innovative embedded computing solutions from board-level products, chassis-level platforms, to configurable application-ready systems. With a focus on AdvancedTCA, MicroTCA, VPX and PCIe solutions, the company offers unmatched product selection and expertise. A unique combination of electrical, mechanical, software, and system-level expertise, enables VadaTech to provide customized commercial or rugged computing solutions to meet the most complex customer requirements. VadaTech also offers specialized product solutions for VME, CompactPCI, and other architectures. A member of PICMG and VITA, VadaTech has headquarters, design and manufacturing facilities in Henderson, NV with design, support and sales offices in Europe and Asia Pacific.

Leave a Reply

featured blogs
Oct 18, 2018
The IC6.1.8 and ICADVM18.1 production releases are now available for download at Cadence Downloads . IC6.1.8 ICADVM18.1 For information on supported platforms, compatibility with other Cadence tools, and details of key issues reported by our early access partners that have be...
Oct 17, 2018
Samtec offers one of the industry'€™s largest and most flexible lines of two-piece, pin-and-socket board-stacking interconnects. To say it another way, we have more ways to stack two or more boards together than any other connector company.  Also, you can specify a cust...
Oct 16, 2018
  IC Insights has just published the September Update to The 2018 McClean Report, and one figure (reproduced below) puts yet another nail into the coffin for poor old Moore'€™s Law. Now please take care. There'€™s a vertical line between the 200mm wafers on the left ...
Oct 12, 2018
At the end of the day, your products are only as good as their in-the-field performance. It doesn'€™t matter how well they performed in a controlled environment....