industry news
Subscribe Now

Allegro Microsystems, LLC Announces a New High Current Synchronous Buck Regulator with Fault and Power OK Pins

Worcester, MA – March 2013 – Allegro MicroSystems, LLC announces a new synchronous buck converter capable of delivering high current due to low RDS(on) internal switches. Allegro’s A8672utilizes valley current mode control, allowing very short on-times to be achieved. This makes it ideal for applications that require very low output voltages, relative to the input voltage in combination with high switching frequencies. Typical applications include servers and networking systems that require 5 V or 12 V input step down conversions at high output current.

Valley current mode control inherently provides improved transient response over traditional switcher schemes, through the use of a voltage feed-forward loop and frequency modulation during large signal load changes. The A8672 includes a comprehensive set of diagnostic flags, allowing the host platform to react to a myriad of different fault conditions. A fault output indicates when either the temperature is becoming unusually high, or a single point failure has occurred; for example, the switching node (LX) shorted to ground, or the timing resistor going open-circuit. A Power OK (POK) output is also provided after a fixed delay, to indicate when the output voltage is within regulation. The selectable pulse-by-pulse current limit avoids the requirement to oversize the inductor to cope with large fault currents.

Allegro’s A8672EEGTX-T is targeted at the industrial, consumer and computer markets and is available in a 4 mm x 5 mm, 28-contact QFN (suffix EG) with exposed pad for enhanced thermal performance.  It is priced at $1.42 in quantities of 1,000. 

About Allegro

Allegro MicroSystems, LLC is a leader in developing, manufacturing and marketing high-performance semiconductors. Allegro’s innovative solutions serve high-growth applications within the automotive market, with additional focus on office automation, industrial, and consumer/communications solutions. Allegro is headquartered in Worcester, Massachusetts (USA) with design, applications, and sales support centers located worldwide. Further information about Allegro can be found at www.allegromicro.com.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Why Wiwynn Energy-Optimized Data Center IT Solutions Use Cadence Optimality Explorer

Sponsored by Cadence Design Systems

In the AI era, as the signal-data rate increases, the signal integrity challenges in server designs also increase. Wiwynn provides hyperscale data centers with innovative cloud IT infrastructure, bringing the best total cost of ownership (TCO), energy, and energy-itemized IT solutions from the cloud to the edge.

Learn more about how Wiwynn is developing a new methodology for PCB designs with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

PIC32CX-BZ2 and WBZ451 Multi-Protocol Wireless MCU Family
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Shishir Malav from Microchip explore the benefits of the PIC32CX-BZ2 and WBZ45 Multi-protocol Wireless MCU Family and how it can make IoT design easier than ever before. They investigate the components included in this multi-protocol wireless MCU family, the details of the software architecture included in this solution, and how you can utilize these MCUs in your next design.
May 4, 2023
41,460 views