industry news
Subscribe Now

Groundbreaking Radiation Detector developed by Irish Researchers to Protect Astronauts will be space bound by June 2016

06 January 2016, Netherlands – In the harsh environment of space, astronauts are exposed to many dangers – including the possibly harmful health effects of radiation exposure. Previous radiation detectors have only revealed how much exposure an astronaut has received after their return to Earth. However, a team of European researchers has developed an active and wearable radiation monitor that can measure radiation in real time and instantly warn astronauts of increased and dangerous radiation levels. It was announced that the radiation monitor will be placed permanently on the International Space Station (ISS) in June 2016 during a visit to the European Space Research and Technology Centre (ESTEC) by the Taoiseach, Enda Kenny TD, as part of the Enterprise Ireland Trade and Investment Mission to Netherlands and Germany.

The breakthrough system, which has been recently tested on the International Space Station, is the result of a European Space Agency-sponsored collaborative project with contributions from Tyndall National Institute in Cork, the German Aerospace Centre (DLR, project co-ordinator), RADOS/Mirion of Finland, Seibersdorf Laboratories of Austria, and PTB of Germany. The radiation monitor will be placed permanently on the ISS in June 2016.

Speaking from Amsterdam, the Taoiseach said: “Agencies, businesses and Governments work together across Europe to expand our reach into space. I’m delighted to see the results of this collaborative research, involving Tyndall National Institute in Cork, which has produced this new radiation monitor which will be placed on the International Space Station in summer 2016. The device will play a critical role in detecting dangerous radiation levels, immediately alerting astronauts and giving them the time to protect themselves while on critical space missions which, up until now, was not possible.”

The device, a personal radiation dosimeter system, is made up of two parts: a phone-sized Mobile Unit, worn in a pouch on the astronaut’s body, and a Personal Storage Device, which is a docking station to recharge the Mobile Unit, download data and transmit it back to Earth. The Mobile Unit part of the device has recently returned from testing on the International Space Station, and in a world-first event, it actively monitored radiation during its launch into space on board the Soyuz spacecraft. The system was developed as a result of the EuCPAD (European Crew Personal Active Dosimeters) project, and the “active” part of the name is crucial, as the innovative aspect of the device is its active, real-time monitoring of radiation levels.

Dr. Aleksandar Jaksic of Tyndall’s Devices and Systems for Radiation Dosimetry team said, “Currently astronauts use radiation detection devices that are passive and only get analysed on their return to tell them what radiation dose they received. If a catastrophic radiation event happens, like a solar flare, they will not know about it in time to protect themselves and hide in more shielded modules of the ISS. But this device, which can be worn in a pocket, shows the radiation levels in real time and can alarm astronauts if the dose goes above a certain threshold. In addition, it enables a time resolved personal radiation record for each astronaut.”

A small team at Cork’s Tyndall National Institute led by Dr. Jaksic, in close co-operation with the institute’s semiconductor fabrication plant, developed, fabricated and supplied three of the four different types of radiation sensors that make up the mobile unit part of the device. Each sensor covers a different type or spectrum of radiation to give a comprehensive picture of the radiation environment in space, which is more complex and harder to measure than that on Earth.

“It was a big leap for us, and a challenging project. This is the most comprehensive system ever developed for personal radiation dosimetry,” said Dr. Jaksic. “The project needed very specialised sensors, and we supplied three out of the four sensors that went into the finished unit. Our role has been to supply the basic detector chips, and we’re very proud to have been part of it.”

This project continues Tyndall National Institute’s productive relationship with the European Space Agency. Since 2009, Tyndall has been contracted as a Microelectronics Technology Support Laboratory to ESTEC, ESA’s research and test centre in the Netherlands.

Julie Sinnamon, CEO, Enterprise Ireland said: “Co-ordinating Ireland’s industrial and research participation in European Space Agency programmes is part of Enterprise Ireland’s role and I’m delighted to see how Tyndall National Institute’s research has contributed to the protection of astronauts’ health and the future of our space industry.  We will continue to assist Irish companies in successfully bidding for ESA contracts as well as being point of reference for the international space industry interested in collaborating with Irish companies”. 

If the initial ten-day trial of the Mobile Unit on board the ISS proves successful, the entire unit, including its Personal Storage Device, will be placed permanently on the ISS in June 2016. Dr. Jaksic anticipates that a successful deployment of the device will lead to further improvements: the device may be made smaller, to be worn like a wristwatch, or add more sensitive detectors in the future.

“This will give astronauts a warning system to avoid excessive radiation. We are very excited to see the results of the experiment this week – flying a device into space is a crowning achievement,” said Dr. Jaksic. “It was an exotic project and technically challenging – it was great to be involved. We’re confident that this will be a breakthrough.”

“Tyndall has a long association with ESA and ESTEC. The Microelectronics Technology Support Laboratory (MTSL) to ESTEC calls on the capabilities and expertise available at Tyndall for the evaluation of new materials, assembly and packaging technologies and the quality verification of a range of spacegrade components. We are engaged in several longer-term research & development projects with ESA  which generate new technologies for new applications and markets as well as advancing knowledge and expertise in space exploration technologies”, said Dr Kieran Drain, CEO Tyndall.

About Tyndall National Institute

Established with a mission to support industry and academia in driving research to market, Tyndall National Institute is one of Europe’s leading research centres in Information and Communications Technology (ICT) research and development and the largest facility of its type in Ireland. Established in 2004 as a successor to the National Microelectronics Research Centre (NMRC founded in 1982) at University College Cork, the Institute employs over 460 researchers, engineers and support staff, with a full-time graduate cohort of 135 students generating over 200 peer-reviewed publications each year. With a network of 200 industry partners and customers worldwide, Tyndall generates around €30M income each year, 85% from competitively won contracts nationally and internationally. Tyndall is also a lead partner in European research partnerships in its core areas of ICT, communications, energy, health and the environment worth €44M, including €6M accruing to industry in Ireland (from Framework 7). Hosting the only full CMOS (metal oxide semiconductor) integrated circuit construction, Micro Electronic Mechanical systems (MEMS) and III-V Wafer Semiconductor fabrication facilities and services in Ireland, Tyndall is capable of prototyping new product opportunities for its target industries – electronics, medical devices, energy and communication. Tyndall is a globally leading Institute in its four core research areas of Photonics, Microsystems, Micro/Nanoelectronics and Theory, Modeling and Design. Tyndall is the lead institution for the Science Foundation Ireland funded Irish Photonics Integration Centre (IPIC).


Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Power Gridlock
The power grid is struggling to meet the growing demands of our electrifying world. In this episode of Chalk Talk, Amelia Dalton and Jake Michels from YAGEO Group discuss the challenges affecting our power grids today, the solutions to help solve these issues and why passive components will be the heroes of grid modernization.
Nov 28, 2023
20,203 views