industry news
Subscribe Now

Lowest Power RS-485 Transceiver from Exar Includes Low Voltage Interface and Features <3uA Standby Current

Fremont, CA – December 1, 2015 – Exar Corporation (NYSE: EXAR), a leading supplier of analog mixed-signal products serving the industrial, high-end consumer and infrastructure markets, announces the XR33202, a half-duplex, 20Mbps RS-485 (TIA/EIA-485) transceiver optimized to operate over a wide 3V to 5.5V supply voltage range.  The transceiver includes an adjustable low voltage logic interface and features the industry’s lowest standby current of 3uA (max), 0.05uA (typ). The device’s wide operating voltage range, flexible logic interface, and low standby current make it ideal for battery-powered and multi-voltage systems. 

“The adjustable low voltage interface included in the XR33202 simplifies integration of the transceiver in low voltage and multi-voltage systems,” said Dale Wedel, Exar’s vice president, high performance analog products.

The XR33202 exceeds the highest ESD rating of IEC 61000-4-2 Level 4. It also includes protection features such as hot swap glitch, overload and enhanced receiver fail-safe for open, shorted or terminated idle data lines. 
Specified over an extended temperature range of -40oC to 125oC, the XR33202 is offered in RoHS compliant, green/halogen free, space-saving 3mm x 3mm DFN package. 1,000-piece pricing starts at $1.60 each. 
For more information, visit http://www.exar.com/XR33202. Additional information on other serial transceiver products is available athttp://www.exar.com/connectivity/transceiver.

Summary of features:

•       Wide 3.0V to 5.5V supply operation
•       1.65V to 5.5V I/O logic interface VL pin
•       <3uA (max) standby current
•       20Mbps maximum data rate  •     Robust ESD (Electrostatic Discharge) protection for RS-485 bus pins
•       -40°C to 125°C ambient operating temperature range

About Exar

Exar Corporation designs, develops and markets analog mixed-signal products for the industrial and embedded systems communications, high-end consumer and infrastructure markets. Exar’s broad product portfolio includes power management, signal conditioning, interface, display, data management and video processing solutions. Exar has locations worldwide providing real-time customer support.  For more information, visit www.exar.com
Exar, XR, the Exar logo are registered trademarks and PowerArchitect is a trademark of Exar Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

FlyOver® Technology: Twinax FlyOver® System for Next Gen Speeds -- Samtec and Mouser
Sponsored by Mouser Electronics and Samtec
In this episode of Chalk Talk, Amelia Dalton and Matthew Burns from Samtec investigate the challenges of routing high speed data over lossy PCBs. They also discuss the benefits that Samtec’s Flyover® cable assembly systems bring to data center and embedded designs and how Samtec is furthering innovation with their high speed interconnect solutions. 
Apr 15, 2024
1,550 views