industry news
Subscribe Now

World’s first truly copper-free data and power link transforms traditional antenna technology

Precise timing synchronisation for high-performance networks, is now improved as HUBER+SUHNER launches enhancements to the world’s first truly copper-free fiber powered link.

The HUBER+SUHNER Global Navigation Satellite System (GNSS) and Power-over-Fiber solution brings pre-, during, and post installation benefits to telecommunications providers working in the 5G and data center space. Using fiber optics as a means of power for the antenna brings cost and timing savings during installation and operation, as no power distribution is needed on a building’s roof.

“As the volume of data and transfer speeds continue to increase, so too does the requirement for accurate time synchronisation, with GNSS timing signals in use within many applications, from data centers to central offices” says Product manager Dominik Tibolla at HUBER +SUHNER. “Using the GNSS signal from satellites enables the acquisition of precise and accessible timing information from atomic clocks, whilst combining this with the distribution over fiber, lower attenuation over longer distances is enabled.”

Traditionally, power is carried over copper technology with a GNSS antenna. This often requires a power cable to be attached alongside the signal distribution cable. The GNSS and Power-over-Fiber solution from HUBER+SUHNER eliminates the need for a separate power cable by utilising the fiber optic connection to the antenna as a means of power and signal distribution.

GNSS and Power-over-Fiber solutions go beyond where existing technology could reach. It enables an increased distance of a few kilometers between source and receiver system, compared to a few meters previously. Satellite signals cannot usually reach indoor locations due to the blocking effect of the building structure but combining this with fiber distribution internally, the HUBER+SUHNER GNSS and Power-over-Fiber solution distributes the GNSS signals to all corners of a building interior, providing a more secure, reliable, and flexible connection.

Using the fiber as a means of power distribution also offers unlimited safe and secure timing signal reference distribution, with reduced interference. Providers can also take advantage of its ability to make use of existing infrastructure, by only having to pay for what is used within the network and being ‘future-proof ready’, with easy and flexible expansion opportunities.

The GNSS and Power-over-Fiber solution will be on show at the OFC exhibition in San Diego 7th-9th March 2023. Visit HUBER+SUHNER at booth #5608 to hear directly from technical experts on the multitude of benefits this solution brings to the market.

More to explore

For more information about GNSS and Power over Fiber, please visit the HUBER+SUHNER website – https://www.hubersuhner.com/en/products-en/radio-frequency/rf-over-fiber-series/direct-gps-over-fiber/gnss-and-power-over-fiber

Leave a Reply

featured blogs
Apr 16, 2024
In today's semiconductor era, every minute, you always look for the opportunity to enhance your skills and learning growth and want to keep up to date with the technology. This could mean you would also like to get hold of the small concepts behind the complex chip desig...
Apr 11, 2024
See how Achronix used our physical verification tools to accelerate the SoC design and verification flow, boosting chip design productivity w/ cloud-based EDA.The post Achronix Achieves 5X Faster Physical Verification for Full SoC Within Budget with Synopsys Cloud appeared ...
Mar 30, 2024
Join me on a brief stream-of-consciousness tour to see what it's like to live inside (what I laughingly call) my mind...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Neutrik powerCON®: Twist and Latch Locking AC Power Connectors
Sponsored by Mouser Electronics and Neutrik
If your next design demands frequent connector mating and unmating and use in countries throughout the world, a twist and latch locking AC power connector would be a great addition to your system design. In this episode of Chalk Talk, Amelia Dalton and Fred Morgenstern from Neutrik explore the benefits of Neutrik's powerCON® AC power connectors, the electrical and environmental specifications included in this connector family, and why these connectors are a great fit for a variety of AV and industrial applications. 
Nov 27, 2023
18,782 views