industry news
Subscribe Now

Vishay Intertechnology AEC-Q200 Qualified Thin Film Wraparound Chip Resistors Combine High Power Ratings to 2.5 W With Superior Moisture Resistance

Offered in the 1206 and 2512 Case Sizes, Devices Deliver Precision Performance With Low TCR Down to ± 25 ppm/°C and Tolerance to ± 0.1 %

MALVERN, Pa. — Sept. 15, 2021 — Vishay Intertechnology, Inc. (NYSE: VSH) today introduced a new series of AEC-Q200 qualified, high power thin film wraparound chip resistors. The Vishay Dale Thin Film PHPA series devices combine power ratings of 1.0 W and 2.5 W in the 1206 and 2512 case sizes, respectively, with a self-passivated tantalum nitride film for superior moisture resistance.

The devices released today will be used in automotive power supplies, braking systems, on-board chargers, and motor deflection circuits, in addition to industrial test and measurement equipment. For precision performance in these applications, the resistors combine their high power ratings with low absolute TCR down to ± 25 ppm/°C and tolerances down to ± 0.1 %.

PHPA series devices offer a resistance range from 10 Ω to 30.1 kΩ, low noise of less than -30 dB, low voltage coefficients of < 0.1 ppm/V, and a working voltage of 200 V. Featuring a high purity ceramic substrate, the resistors are designed with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the PCB.

The devices are RoHS-compliant, halogen-free, and flame-resistant in accordance with UL 94 V-0. They operate over a wide temperature range of -55 °C to +155 °C.

Samples of the PHPA series are available now. Production quantities are available from franchised distributors, with lead times of 10 to 12 weeks. Pricing for U.S. delivery varies by tolerance, TCR, and case size. For example, typical pricing for the 1206 case size with a ± 0.1 % tolerance and TCR of ± 25 ppm/°C is $0.48 per piece in 1,000-piece quantities.

Vishay manufactures one of the world’s largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Serving customers worldwide, Vishay is The DNA of tech.™ Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH). More on Vishay at www.Vishay.com.

Leave a Reply

featured blogs
Oct 26, 2021
We unpack the demanding PPA requirements for edge AI SoCs, as chip designers turn their attention to edge AI applications such as embedded vision systems. The post Smarter Ways to Meet Your PPA Targets for Edge AI Processors appeared first on From Silicon To Software....
Oct 26, 2021
Component placement is one of the most critical aspects of PCB designing. As the number of components and layers increases, the complexities of placing components increase manifold. Allegro® PCB... [[ Click on the title to access the full blog on the Cadence Community s...
Oct 20, 2021
I've seen a lot of things in my time, but I don't think I was ready to see a robot that can walk, fly, ride a skateboard, and balance on a slackline....
Oct 4, 2021
The latest version of Intel® Quartus® Prime software version 21.3 has been released. It introduces many new intuitive features and improvements that make it easier to design with Intel® FPGAs, including the new Intel® Agilex'„¢ FPGAs. These new features and improvements...

featured video

DesignCon 2021 112G Ethernet & PCIe 6.0 IP Demos

Sponsored by Synopsys

This video features Synopsys' silicon-proven DesignWare 112G Ethernet and PCIe 6.0 PHY IP solutions successfully interoperating with Samtec's AI/ML edge connectors and Amphenol's Direct Attach Copper (DAC) cables with superior Bit Error Rates (BERs) at maximum performance.

Click here for more information about DesignWare 112G Ethernet PHY IP

featured paper

Building Automation and Control Systems (BACS)

Sponsored by Maxim Integrated (now part of Analog Devices)

Analog Device's industrial communication products provide building automation engineers with a broad range of Analog IO, Digital IO, Isolation, and communication interfaces that combine low power, robust performance, and improved diagnostics in the smallest possible form factors.

Click to read more

featured chalk talk

High-Performance Test to 70 GHz

Sponsored by Samtec

Today’s high-speed serial interfaces with PAM4 present serious challenges when it comes to test. Eval boards can end up huge, and signal integrity of the test point system is always a concern. In this episode of Chalk Talk, Amelia Dalton chats with Matthew Burns of Samtec about the Bullseye test point system, which can maintain signal integrity up to 70 GHz with a compact test point footprint.

Click here for more information about Samtec’s Bulls Eye® Test System