industry news
Subscribe Now

VadaTech Announces FMC with Dual NVMe Solid State Drives and RS-485/422

Henderson, NV – September 4, 2019 – VadaTech, a leading manufacturer of integrated systems, embedded boards, enabling software and application-ready platforms, announces the FMC257. The FMC257 is a storage module with dual NVMe storage SSD which provides high speed and low latency read/write. The module allows the FPGA to access a large capacity of storage in a compact space. The FMC257 interfaces to the carrier via dual PCIe x4 (DP0-3 and DP4-7), with supporting IP being available for VadaTech carriers.

The storage has an option for SED which is hardware-based AES-256 Encryption engine. In addition, the FMC257 provides eight RS-485/422 RX plus eight RS-485/422 TX, and eight single-ended +3.3V input or outputs (user configurable per I/O).

The RS-485/422 configuration can be selected as full-duplex RS-422 (independent RX/TX pairs with RX termination) or half-duplex RS-485 (RX/TX pairs tied together, no termination on board) based on the ordering option. The FMC257 can provide power of up to 12W to an external module.

About VadaTech

VadaTech provides innovative embedded computing solutions from board-level products, chassis-level platforms, to configurable application-ready systems. With a focus on AdvancedTCA, MicroTCA, VPX and PCIe solutions, the company offers unmatched product selection and expertise. A unique combination of electrical, mechanical, software, and system-level expertise, enables VadaTech to provide customized commercial or rugged computing solutions to meet the most complex customer requirements. VadaTech also offers specialized product solutions for VME, CompactPCI, and other architectures. A member of PICMG and VITA, VadaTech has headquarters, design and manufacturing facilities in Henderson, NV with design, support and sales offices in Europe and Asia Pacific.

Leave a Reply

featured blogs
Aug 14, 2020
Eeek Alors! We now have a cunning simulator that you can download and use to create and test programs to run on my 12 x 12 ping pong ball array!...
Aug 14, 2020
[From the last episode: We looked at what it means to do machine learning '€œat the edge,'€ and some of the compromises that must be made.] When doing ML at the edge, we want two things: less computing (for speed and, especially, for energy) and smaller hardware that req...
Aug 14, 2020
Cadence ® Spectre ® AMS Designer is a high-performance mixed-signal simulation system. The ability to use multiple engines and drive from a variety of platforms enables you to "rev... [[ Click on the title to access the full blog on the Cadence Community site....
Aug 13, 2020
My first computer put out a crazy 33 MHz of processing power from the 486 CPU. That was on “Turbo Mode” of course, and when it was turned off we were left with 16 MHz. Insert frowny face. Maybe you are too young to remember a turbo button, but if you aren’t ...

Featured Paper

True 3D EM Modeling Enables Fast, Accurate Analysis

Sponsored by Cadence Design Systems

Tired of patchwork 3D EM analysis? Impedance discontinuity can destroy your BER and cause multiple design iterations. Using today’s 3D EM modeling tools can take you days to accurately model the interconnect structures. The Clarity™ 3D Solver lets you tackle the most complex EM challenges when designing systems for 5G, high-performance computing, automotive and machine learning applications. The Clarity 3D Solver delivers gold-standard accuracy, 10X faster analysis speeds and virtually unlimited capacity for true 3D modeling of critical interconnects in PCB, IC package and system-on-IC (SoIC) designs.

Click here for more information

Featured Paper

Improving Performance in High-Voltage Systems With Zero-Drift Hall-Effect Current Sensing

Sponsored by Texas Instruments

Learn how major industry trends are driving demands for isolated current sensing, and how new zero-drift Hall-effect current sensors can improve isolation and measurement drift while simplifying the design process.

Click here for more information

Featured Chalk Talk

SensorTile. Box - A Ready to Go IoT Node

Sponsored by Mouser Electronics and ST Microelectronics

In the highly competitive IoT market, getting your idea to the prototype stage as quickly as possible is critical. But, designing non-differentiated things like connectivity, power supplies, sensor interfaces, and so forth soaks up valuable design time. In this episode of Chalk Talk, Amelia Dalton chats with Thiago Reis from STMicroelectronics about SensorTile Box - a ready-to-go IoT node development kit that’s just waiting for your great IoT idea.

Click here for more information about STMicroelectronics STEVAL-MKSBOX1V1 SensorTile.box Development Kit