industry news
Subscribe Now

STMicroelectronics Powers e-Mobility with New Microcontrollers for Software-Defined Electric Vehicles

  • Stellar E’ MCUs are dedicated to EV applications and facilitate centralized architectures
  • Simplify high-efficiency power modules for e-drivetrain charging and digital power conversion

Geneva, Switzerland, February 21, 2022 – STMicroelectronics (NYSE: STM), a global semiconductor leader serving customers across the spectrum of electronics applications, has unveiled new automotive microcontrollers (MCUs) optimized for electric vehicles and centralized (domain and zonal) electronic architectures. They enable EVs to become more affordable, drive further, and charge faster.

In current EVs, high-efficiency SiC-based (silicon carbide) power modules enable the greatest driving range and faster charging. Until now, they have required dedicated high-speed signal processors to control the advanced SiC power semiconductors. ST’s Stellar E MCUs, designed for the next generation of software-defined EVs, integrate high-speed control-loop processing on-chip. Now one MCU can control the entire module. This simplifies the module design, saves costs, and eases compliance with automotive safety and security standards.

The new MCUs extend ST’s Arm®-based Stellar family and are designed from the ground up with the car as a platform in mind. As a powerful, centralized domain and zone controller, the family simplifies automotive electrical architectures for increased power, flexibility, and safety. Currently, the MCUs family includes Stellar P series for integration and vehicle control and the Stellar G series for body applications. The Stellar family architecture integrates multiple Arm Cortex cores that deliver high performance with the opportunity for lock-step redundancy and support real-time hardware virtualization. All Stellar devices are designed for software upgradeability through secure over-the-air (OTA) updates.

Our Stellar MCUs enable state-of-the-art electrification while ensuring efficient energy management and software-defined flexibility for vehicle lifecycle management,” said Luca Rodeschini, Automotive and Discrete Group Vice President, Strategic Business Development and Automotive Processing and RF General Manager, STMicroelectronics. “With the new Stellar E devices, this platform now enables a new value chain for EVs. Sensing the environment, controlling vehicle dynamics, enhancing power-conversion efficiency, and safely managing high-current power stages, are effectively handled in a single component. The ability to update software securely over the air lets manufacturers refine their control strategies for extra driving range, performance, and power efficiency.”

The first product in the Stellar E series, the Stellar SR5E1 optimized for EV on-board chargers (OBC) and general DC/DC converters, is now sampling to lead customers. Full production will begin in 2023.

Further technical information

High-power applications in electric vehicles, namely the OBC, e-drivetrain, and various DC/DC converters, are achieving tremendous gains in energy efficiency and reliability leveraging silicon-carbide (SiC) power transistors and diodes. These gains are maximized by operating at switching frequencies significantly higher than the frequencies appropriate for ordinary silicon power semiconductors.

Typical automotive MCUs in the market today cannot execute the charging-control algorithms at a rate that can support the higher SiC switching frequencies. Instead, additional DSP chips are needed specifically to handle the control loop. These require separate coding and add to the bill of materials and complexity of the control module implemented with traditional MCUs, increasing the cost, size, and power consumption.

The Stellar E (Stellar Electrification MCUs) series now provides automotive-qualified MCUs that perform the high-speed control-loop processing alongside general control in the same chip. This simplifies design and streamlines the bill of materials, easing the transition to high-efficiency SiC-based power modules that permit extra driving range and faster charging.

These MCUs can control multiple power converters, leveraging features including a high-speed analog-digital converter (ADC), highly accurate pulse-width modulation (PWM) controller, and fast-acting protection circuitry.

Moreover, the Stellar E series supports the leading automotive standards for functional safety (ISO 26262 ASIL-D), security (HSM -), and industry standard SW interoperability (via Autosar 4.3.x), as well as secure OTA update. Designing with the Stellar family delivers further benefits including extensive software-development toolchain, with a common ecosystem for control and actuation.

About STMicroelectronics

At ST, we are 48,000 creators and makers of semiconductor technologies mastering the semiconductor supply chain with state-of-the-art manufacturing facilities. An independent device manufacturer, we work with more than 200,000 customers and thousands of partners to design and build products, solutions, and ecosystems that address their challenges and opportunities, and the need to support a more sustainable world. Our technologies enable smarter mobility, more efficient power and energy management, and the wide-scale deployment of the Internet of Things and 5G technology. ST is committed to becoming carbon neutral by 2027. Further information can be found at www.st.com.

Leave a Reply

featured blogs
Jul 1, 2022
Throughout this season at Formula One, porpoising has been the most talked-about phenomenon, especially with complaints from drivers about blurred vision and severe back aches. Week after week, not... ...
Jun 30, 2022
Learn how AI-powered cameras and neural network image processing enable everything from smartphone portraits to machine vision and automotive safety features. The post How AI Helps Cameras See More Clearly appeared first on From Silicon To Software....
Jun 28, 2022
Watching this video caused me to wander off into the weeds looking at a weird and wonderful collection of wheeled implementations....

featured video

Synopsys PCIe 6.0 IP TX and RX Successful Interoperability with Keysight

Sponsored by Synopsys

This DesignCon 2022 video features Synopsys PHY IP for PCIe 6.0 showing wide open PAM-4 eyes, good jitter breakdown decomposition on the Keysight oscilloscope, excellent receiver performance, and simulation-to-silicon correlation.

Click here for more information

featured paper

Integrating multiple functions within a housekeeping MSP430 microcontroller

Sponsored by Texas Instruments

Adding a small, low-cost microcontroller (MCU) for simple housekeeping functions can benefit many board designs. This housekeeping (or secondary) MCU is not the main host processor in the system, but it can handle several important system-level functions such as LED control or input/output (I/O) expansion. This article will explain how integrating a multifunction housekeeping MCU in your system can help lower bill-of-materials (BOM) costs, save board space, and best of all simplify your design.

Click to read more

Featured Chalk Talk

Direct Drive: Getting More Juice from Your JFET

Sponsored by Mouser Electronics and UnitedSiC

In this episode of Chalk Talk, Jonathan Dodge from UnitedSiC (now part of Qorvo) and Amelia Dalton discuss how you can take full advantage of silicon carbide JFET transistors. They delve into the details of these innovative transistors including what their capacitances look like, how you can control their speed and how you can combine the benefits of a cascode and a directly driven JFET in your next design.

Click here for more information about UnitedSiC UF4C/SC 1200V Gen 4 SiC FETs