industry news
Subscribe Now

Samtec Virtually Showcases Latest Silicon-to-Silicon Interconnect Solutions at SC20

New Albany, IN Samtec Inc., a privately held $800 MM global manufacturer of a broad line of electronic interconnect solutions, will virtually showcase and demonstrate their latest high-performace interconnect solutions at SuperComputing 2020.

HPC system designers must balance increasing throughput, scalability and density demands with cost and time-to-market. Samtec addresses these challenges with industry-leading design expertise, system optimization, and innovative architectural solutions ideally suited for HPC applications. Key technologies will be featured during SC20 via the Exhibitor Forum, Virtual Demonstations and Featured Products.

SC20 Exhibitor Forum

Brian Niehoff, Technical Marketing Engineer at Samtec, will present the topic Thermal Management of HPC Hardware Architectures via Immersion Cooling.

As computing power increases, air cooled systems cannot meet current thermal requirements in HPC architectures. Immersion cooling economically combats system heat, noise, power consumption and compute density. In this presentation, Samtec will discuss both novel immersion cooling techniques and observed results from testing across its interconnect product portfolio.

SC20 Virtual Demonstrations

  • PCIe® 4.0 Over Fiber Adapter Card: Samtec and Dolphin
  • UCLA’s Ocean High-Throughput Processor in the CMS Experiment at the CERN Large Hadron Collider
  • Thermal Management of HPC Hardware Architectures via Immersion Cooling
  • PLDAs latest PCIe® 5.0 Evaluation and Development Platform

SC20 Virtual Demonstrations

Key Samtec high-performance interconnect solutions will be featured at SC20. From front-panel to the backplane, HPC system designers can count on key solutions from Samtec including:

  • Si-Fly™ 112 Gbps PAM4 Low-Profile High-Density Cable System
  • NovaRay® 112 Gbps PAM4 Extreme Density Arrays
  • FireFly™ Micro Flyover System™
  • AcceleRate® HD, AcceleRate® HP and AcceleRate® Cable Interconnect Solutions

The Exhibitor Forum, Virtual Demonstrations and Featured Products will occur virtually from November 17-19, 2020.

For more information on Accelerating HPC Interconnect via Silicon-to-Silicon Solutions, please visit www.samtec.com/SC20.

About Samtec
Founded in 1976, Samtec is a privately held, $800 MM global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec’s global presence enables its unmatched customer service. For more information, please visit http://www.samtec.com.

Leave a Reply

featured blogs
Apr 19, 2024
In today's rapidly evolving digital landscape, staying at the cutting edge is crucial to success. For MaxLinear, bridging the gap between firmware and hardware development has been pivotal. All of the company's products solve critical communication and high-frequency analysis...
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...
Apr 18, 2024
See how Cisco accelerates library characterization and chip design with our cloud EDA tools, scaling access to SoC validation solutions and compute services.The post Cisco Accelerates Project Schedule by 66% Using Synopsys Cloud appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

TE Connectivity MULTIGIG RT Connectors
In this episode of Chalk Talk, Amelia Dalton and Ryan Hill from TE Connectivity explore the benefits of TE’s Multigig RT Connectors and how these connectors can help empower the next generation of military and aerospace designs. They examine the components included in these solutions and how the modular design of these connectors make them a great fit for your next military and aerospace design.
Mar 19, 2024
4,513 views