industry news
Subscribe Now

Saelig Introduces T3DSO2000A Series Advanced 500MHz Oscilloscopes

The Teledyne LeCroy T3DSO200 100-500MHz scopes provides a minimum vertical input range of 1mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000wfms/sec (sequence mode).
Fairport, NY, USA:Saelig Company, Inc. has introduced the Teledyne Test Tools T3DSO2000A Oscilloscopes which are available in two channel and four channel versions with analog bandwidths from 100MHz to 500MHz. Each model offers a maximum sample rate of 2GSa/s and a maximum memory depth of 200Mpts in half-channel mode. The T3DSO2000A series employs a new generation of high speed display technology that provides excellent signal clarity, fidelity, and performance. The system noise floor is also lower than similar products in the industry. This scope series provides a minimum vertical input range of 1mV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 500,000wfms/sec (sequence mode). The four channel models incorporate two 2GSa/s ADCs and two 140Mpt memory modules. When all channels are enabled, each channel has sample rate of 1GSa/s and a standard record length of 70Mpts.
For ease-of-use, the most commonly used functions can be accessed with a user-friendly 8″ TFT-LCD. A 256-level intensity grading display function and a color temperature display mode complement the remarkable update rate. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response.
Multiple powerful triggering modes are provided to cover many waveform types and signal protocols. Included with each model are Serial Bus Trigger and Decode: I2C, SPI, UART, CAN, LIN. Optional CAN FD, I2 S, MIL-1553B, FlexRay. The models also include History waveform recording and sequential triggering that enable extended waveform recording and analysis. Other options available include the 50MHz function/arbitrary waveform generator and the 16-channel MSO option, both of which are field up gradable options.
Ten types of one-button shortcuts are provided to make instrument use intuitive and fast, which support Auto-Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print. Eight math functions are also included (FFT, addition, subtraction, multiplication, division, integration, differential, square root). Automatic measurements are provided for more than 50 parameters, as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions. Also included are Bode Plot and Power Analysis applications as standard.
The Teledyne LeCroy T3DSO2000A oscilloscopesare available now from their authorized North American distributor Saelig Company, Inc. Fairport, NY. For detailed specifications, free technical assistance, or additional information, please contact Saelig at 888-7SAELIG, via email:
About Saelig Company Inc.
Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing reputation for finding and sourcing remarkable, unique test and measurement and control products and components for use in a wide variety of industries. Products lines are continuously added from sources across the globe, and are offered at competitive prices, accompanied by full in-house technical support, exceptional customer service, and fast delivery. For full details of available product lines, please visit

Leave a Reply

featured blogs
Oct 22, 2020
WARNING: If you read this blog and visit the featured site, Max'€™s Cool Beans will accept no responsibility for the countless hours you may fritter away....
Oct 22, 2020
Cadence ® Spectre ® AMS Designer is a high-performance mixed-signal simulation system. The ability to use multiple engines and drive from a variety of platforms enables you to "rev... [[ Click on the title to access the full blog on the Cadence Community site....
Oct 20, 2020
In 2020, mobile traffic has skyrocketed everywhere as our planet battles a pandemic. saw nearly double the mobile traffic in the first two quarters than it normally sees. While these levels have dropped off from their peaks in the spring, they have not returned to ...
Oct 16, 2020
[From the last episode: We put together many of the ideas we'€™ve been describing to show the basics of how in-memory compute works.] I'€™m going to take a sec for some commentary before we continue with the last few steps of in-memory compute. The whole point of this web...

featured video

Demo: Low-Power Machine Learning Inference with DesignWare ARC EM9D Processor IP

Sponsored by Synopsys

Applications that require sensing on a continuous basis are always on and often battery operated. In this video, the low-power ARC EM9D Processors run a handwriting character recognition neural network graph to infer the letter that is written.

Click here for more information about DesignWare ARC EM9D / EM11D Processors

featured Paper

New package technology improves EMI and thermal performance with smaller solution size

Sponsored by Texas Instruments

Power supply designers have a new tool in their effort to achieve balance between efficiency, size, and thermal performance with DC/DC power modules. The Enhanced HotRod™ QFN package technology from Texas Instruments enables engineers to address design challenges with an easy-to-use footprint that resembles a standard QFN. This new package type combines the advantages of flip-chip-on-lead with the improved thermal performance presented by a large thermal die attach pad (DAP).

Click here to download the whitepaper

Featured Chalk Talk

Power Supply Design

Sponsored by Mouser Electronics and KEMET

There is a bewildering range of choices for components for power supply design. Considering EMI protection, surge protection, transformers, rectifiers - the list goes on and on. In this episode of Chalk Talk, Amelia Dalton chats with Nick Stephen of KEMET to sort out the puzzle of power supply component selection, and to look at the latest trends and best practices in power supply design.

Click here for more information about KEMET Electronics METCOM MPX1 Metal Composite Power Inductors