industry news
Subscribe Now

Saelig Introduces Aaronia IsoLOG 3D Mobile PRO Three-Axis Testing Antenna for RF Measurements to 8GHz

Compatible with any spectrum analyzer, Mobile PRO antennas can be used for 3-axis radiation measurements to 8GHz.

Fairport, NY: Saelig Company, Inc. has introduced the Aaronia IsoLOG 3D Mobile PRO Three-Axis Testing Antennas for RF measurements up to 8GHz. The 3D Mobile PRO is an extremely light and small isotropic antenna, compatible with any spectrum analyzer, for making X/Y/Z-axis RF measurements, or in chop-mode, to make rotating measurements around an X/Y/Z axis, for frequenices up to 8GHz. Ready for rapid use, it offers a plug and play solution for 3D measurements in fast time frames. Lightweight (350 g) and compact (12.5” x 2.75” 2.75”), the IsoLOG3D Mobile PRO is a versatile, portable RF measurement tool. The antenna requires no software installation, no power connection, and no changes to hardware. It can be connected to any analyzer or oscilloscope via its N (male or female) connector.

The IsoLOG 3D Mobile PRO is available in three different versions: 9 kHz – 3 GHz (9030 PRO), 9 kHz – 6 GHz (9060 PRO), 9 kHz – 8 GHz (9080 PRO). Each IsoLOG 3D Mobile PRO includes an internal, rechargeable battery offering an operating time of approximately 6 hours, but it may also be DC-powered. Switchable integrated low-noise single or dual pre-amplifiers (+15dB each @ 2GHz) allow the measurement of even very weak signals, while in bypass mode the antenna can take accurate measurements in high field strength situations.

The antenna is controlled either via USB, or by manual selection, requiring no USB connection. The IsoLOG 3D Mobile PRO built-in, ultra-fast and adjustable “chopper” function uses glitch-free RF switches to provide an automatic endless antenna rotation / selection, with a switching duration of up to 50 kHz. This transforms the IsoLOG 3D Mobile PRO into a fully-functional 3D antenna without the need for any USB software control.

Features:

  • Compatible with any spectrum analyzer
  • 9 kHz to 8 GHz frequency range
  • High gain and low noise
  • Two built-in bypass 15dB pre-amplifiers
  • Manual or automatic axis switching
  • 650mAh LiPo battery- or DC-powered
  • 6h battery operating time
  • 12.5oz; 12.5” x 2.75” 2.75”

Made in Germany by Aaronia AG, Europe’s award-winning, innovative manufacturer of RF site survey tools, handheld spectrum analyzers, antennas and EMC test probes, the IsoLOG 3D Mobile PRO range is available now from Saelig Company, Inc., technical distributor for Aaronia USA. For detailed specifications, free technical assistance, or additional information, please contact Saelig 1-888-7SAELIG, via email:  info@saelig.com, or visit www.saelig.com.

About Saelig Company Inc.

Founded in 1988 in Rochester, New York, Saelig is a North American distributor with a growing reputation for finding and sourcing remarkable, unique test and measurement and control products and components for use in a wide variety of industries. Products lines are continuously added from sources across the globe, and are offered at competitive prices, accompanied by full in-house technical support, exceptional customer service, and fast delivery. For full details of available product lines, please visit www.saelig.com.

Leave a Reply

featured blogs
Mar 4, 2024
The current level of computing power is unprecedented. It has led to the development of advanced computational techniques that enable us to simulate larger systems and predict complex phenomena with greater accuracy. However, the simulation of turbomachinery systems still pos...
Mar 1, 2024
Explore standards development and functional safety requirements with Jyotika Athavale, IEEE senior member and Senior Director of Silicon Lifecycle Management.The post Q&A With Jyotika Athavale, IEEE Champion, on Advancing Standards Development Worldwide appeared first ...
Feb 28, 2024
Would it be better to ride the railways on people-powered rail bikes, or travel to the edge of space in a luxury lounge hoisted by a gigantic balloon?...

featured video

Tackling Challenges in 3DHI Microelectronics for Aerospace, Government, and Defense

Sponsored by Synopsys

Aerospace, Government, and Defense industry experts discuss the complexities of 3DHI for technological, manufacturing, & economic intricacies, as well as security, reliability, and safety challenges & solutions. Explore DARPA’s NGMM plan for the 3DHI R&D ecosystem.

Learn more about Synopsys Aerospace and Government Solutions

featured paper

Reduce 3D IC design complexity with early package assembly verification

Sponsored by Siemens Digital Industries Software

Uncover the unique challenges, along with the latest Calibre verification solutions, for 3D IC design in this new technical paper. As 2.5D and 3D ICs redefine the possibilities of semiconductor design, discover how Siemens is leading the way in verifying complex multi-dimensional systems, while shifting verification left to do so earlier in the design process.

Click here to read more

featured chalk talk

Enabling the Evolution of E-mobility for Your Applications
The next generation of electric vehicles, including trucks, buses, construction and recreational vehicles will need connectivity solutions that are modular, scalable, high performance, and can operate in harsh environments. In this episode of Chalk Talk, Amelia Dalton and Daniel Domke from TE Connectivity examine design considerations for next generation e-mobility applications and the benefits that TE Connectivity’s PowerTube HVP-HD Connector Series bring to these designs.
Feb 28, 2024
611 views