industry news archive
Subscribe Now

Saelig Introduces Economical Siglent SSG3000X 2.1GHz/3.2GHz RF Signal Generators

Fairport, NY, USA: Saelig Company, Inc. has introduced the Siglent SSG3000X RF Signal Generators, which have a frequency range of 9kHz to 2.1GHz or 3.2GHz. They provide all of the common signal generation needs such as sweep control and analog modulations (AM, FM, PM) as well as pulse modulation and pulse train generation (option). Additionally, the IQE models can be used with a baseband generator such as the Siglent SDG6000X to generate IQ modulated signals. With a 0.01Hz frequency setting resolution, the signal output can be adjusted from -110dBm to +13dBm with phase noise … Read More → "Saelig Introduces Economical Siglent SSG3000X 2.1GHz/3.2GHz RF Signal Generators"

Real Intent Provides Comprehensive Reset Analysis with Meridian RXV

SUNNYVALE, CA– (October 29, 2018) – Real Intent, Inc., a leading provider of SoC and FPGA sign-off verification solutions, today announced Meridian RXV, a new tool to tackle “X” sources and design initialization up-front at the Register Transfer Level ( … Read More → "Real Intent Provides Comprehensive Reset Analysis with Meridian RXV"

New TI portfolio of ready-to-use, 600-V GaN FET power stages supports applications up to 10 kW

DALLAS (Oct. 29, 2018) – Texas Instruments (TI) (NASDAQ: TXN) today announced a new portfolio of ready-to-use, 600-V gallium nitride (GaN), 50-mΩ and 70-mΩ power stages to support applications up to 10 kW. The LMG341x family enables designers to create smaller, more efficient and higher- performing designs compared to silicon field-effect transistors (FETs) in AC/DC power supplies, robotics, renewable energy, grid infrastructure, telecom and personal electronics applications. For more information, see http://www.ti.com/lmg3410r050-pr, http://www.ti.com/lmg3410r070-pr and http://www.ti.com/lmg3411r070-pr.

Read More → "New TI portfolio of ready-to-use, 600-V GaN FET power stages supports applications up to 10 kW"

Electriq~Global launches water-based fuel to power electric vehicles

On October 29th and October 30th at EcoMotion 2018 ‘Smart Mobility Summit’ in Tel-Aviv, Electriq~Global will present its highly efficient, safe, clean, recyclable fuel to power electric vehicles. The fuel offers twice the range, at half the price with zero emission compared to existing fuels

Melbourne, Australia & Haifa, Israel, Oct. 29, 2018 – Australian-Israeli startup Electriq~Global (www.Electriq.com</ … Read More → "Electriq~Global launches water-based fuel to power electric vehicles"

Vishay Intertechnology’s New Proximity Sensor Features Range Up to 20 cm in 3.05 mm by 2 mm Leadless Package

MALVERN, Pa. — Oct. 29, 2018 — Vishay Intertechnology, Inc. (NYSE: VSH) today introduced a fully integrated proximity sensor that combines a high power vertical-cavity surface-emitting laser (VCSEL), a photodiode, a signal processing IC, and a 12-bit ADC in a single package. The new VCNL36687S is designed to be used in smartphones, tablets, virtual reality / augmented reality (VR / AR) headsets, and other battery-operated devices.

With a range of up to 20 cm (7.9 inches), the VCNL36687S greatly simplifies the use and design-in of the proximity sensing capability in consumer and industrial applications, because no mechanical barriers are required to optically isolate … Read More → "Vishay Intertechnology’s New Proximity Sensor Features Range Up to 20 cm in 3.05 mm by 2 mm Leadless Package"

DesignCore® RVP-TDA2Px Development Kit accelerates ADAS and autonomous system design through production

Rochester, NY – Oct. 29, 2018 – D3 Engineering, a Texas Instruments platinum design partner, announced its DesignCore® RVP-TDA2Px Development Kit for autonomous systems development. The production-intent kit features TI’s TDA2Px SoC processor and 4Gbps FPD-Link™ III SerDes interface.

D3 Engineering’s Rugged Vision Platform (RVP) allows rapid technology evaluation and system development under realistic on-vehicle conditions. It accelerates development of Advanced Driver Assistance Systems (ADAS) and autonomous systems, and provides a streamlined path to production.

Automotive applications include camera monitoring systems (CMS) such as multi-camera/multi-display mirror … Read More → "DesignCore® RVP-TDA2Px Development Kit accelerates ADAS and autonomous system design through production"

OmniVision’s New 24-MP Image Sensor Family Enables High-End Smartphone Cameras With Top Image Quality and Advanced Features

SANTA CLARA, Calif. – Oct. 29, 2018 – OmniVision Technologies, Inc., a leading developer of advanced digital imaging solutions, today announced the second generation of its 0.9 micron, 1/2.83-inch optical format 24 megapixel (MP) image sensors, built on the PureCel® Plus stacked die technology. The OV24B sensor family is designed for high-resolution front- and rear-facing smartphone cameras, with cutting-edge technologies and design enhancements that enable differentiated features and excellent imaging performance.

The new image sensor family is available in four versions:

featured blogs
Apr 24, 2026
A thought experiment in curiosity, confusion, and cosmic consequences....