New series of regulated high-voltage DC-DC converters from XP Power for Analytical, Semiconductor and Detector applications

May 6th, 2021 – XP Power today released the HRC05 series of 5W regulated high-voltage DC-DC converters that delivers a fully adjustable and reliable output voltage up to 6kVDC in a small package. Models in the series provide design engineers working on high voltage integration with a complete set of features as standard in one compact footprint. Key highlights include the low line and load regulation (<0.01%) and excellent ripple performance (<0.01%), providing accurate and reliable high voltage for long term applications. All models are approved to IEC/UL/CSA/EN 62368-1, 61010-1 standards and are UKCA & CE marked to applicable directives & legislation for global use.

The input voltage of the HRC05 series is 24VDC nominal, with an operating range from 22VDC to 30VDC. It is available in 18 models with positive or negative DC outputs ranging from 0V to 350V up to 0V to 6000V. The output voltage can be adjusted from 0 to 100% with the onboard 0 to +5VDC reference input for easy high voltage integration and control. Voltage and current monitor outputs are also included in the standard package.

The PCB mount, convection-cooled units measure just 65mm x 33mm x 14mm (WxLxH); they are housed in a UL94V-0 rated encapsulation material and 5-sided metal case that is internally grounded, offering optimal mechanical integration and robustness into the overall system and space saving. The operating temperature range of the HRC05 series is -40°C to +70°C with no current derating over the range. Stability is 100ppm over 8 hours (after a 30-minute warm-up).

The HRC05 series features short circuit, arc, overload, and over-temperature protection circuitry and remote on/off to ensure the safety of both the device and the application in which it is installed. Key applications include mass spectrometry, electrophoresis, electrostatic chuck, detectors, capacitor charging, scanning electron microscopes (SEMs), imaging, and diagnostics equipment.

The HRC05 series is available from Digi-Key, Farnell, Mouser, RS Components, approved regional distributors, or direct from XP Power, and comes with a 3-year warranty.

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

Using the Vishay IHLE® to Mitigate Radiated EMI

Sponsored by Mouser Electronics and Vishay

EMI mitigation is an important design concern for a lot of different electronic systems designs. In this episode of Chalk Talk, Amelia Dalton and Tim Shafer from Vishay explore how Vishay’s IHLE power inductors can reduce radiated EMI. They also examine how the composition of these inductors can support the mitigation of EMI and how you can get started using Vishay’s IHLE® High Current Inductors in your next design.

Click here for more information about Vishay / Dale IHLE High Current Inductors with E-Field Shield

Dec 4, 2023

18,664 views

New series of regulated high-voltage DC-DC converters from XP Power for Analytical, Semiconductor and Detector applications

Related