industry news
Subscribe Now

Imec and TNO Launch Comfortable, Disposable Health Patch with Long Battery Life to Measure Vital Signs

EINDHOVEN (Holst Centre, The Netherlands) and LEUVEN (Belgium), January 8, 2019 – This week, at the Consumer Electronics Show (CES 2019), taking place in Las Vegas, imec and TNO are presenting the latest version of their health patch. Developed in the framework of the Holst Centre in Eindhoven, the new health patch offers unprecedented comfort and a long battery life, previously unseen in this type of device. It can also be manufactured at a fraction of the cost of previous generations, making it a user-friendly, disposable solution for ambulant patient monitoring.

“A crucial technology improvement in this new generation health patch is the integration of a wide range of sensing capabilities into imec’s MUSEIC V3 system-on-chip solution. As a result, the device is almost an order of magnitude cheaper, while the high degree of integration makes it much more energy-efficient. The significant cost reduction means that the patch can now be used as a disposable solution, an important benefit for medical treatment,” says Bernard Grundlehner, System Architect – Connected Health Solutions at imec the Netherlands.

The patch uses a mix of skin friendly and biocompatible materials.  The base substrate is a very thin, flexible and elastic TPU material. Most of the electronic functionality is realized using printed electronics technologies and integrated dry electrodes provide a stable and high-quality electrical connection to the body. A comfortable silicone adhesive is used to provide long-term adhesion at high comfort. “Completely watertight, the new health patch is built for maximum user comfort and can be worn for up to seven days before needing to be replaced”, explains Prof. Jeroen van den Brand, program director printed electronics, TNO.

To limit the ecological footprint of the single-use patch, imec researchers have collaborated with Maxell Ltd. to develop an environmentally friendly battery which does not contain any toxic substances. Additionally, the MUSEIC V3 also improves the overall energy-efficiency because of its low-power signal acquisition. While competing solutions generally advertise a battery life of 3-4 days, imec’s solution has a battery life of over 7 days, in many cases even longer, depending on the specific configurations

For patients, a single, disposable patch that can be worn for several days is more convenient and can reduce hospital visits as it no longer needs to be returned after use. This is particularly important for chronically ill patients as it provides an affordable, single-use device that can be easily used to monitor their vital signs and physical activity at home. Easy to apply and comfortable to wear for long periods of time, it enables patients to perform their normal daily activities with minimal impact while providing valuable information to optimize their treatment and medication. The single-use concept can also reduce time spent in the hospital as it allows patients to be sent home earlier while still remotely monitoring their vital signs.

Even more versatile than its predecessors, the new patch now also measures blood oxygen saturation (SpO2). This is an important vital sign for assessing a patient’s physical health as low blood oxygen levels can indicate hypoxemia which – if untreated – can compromise organ functions and can even lead to respiratory or cardiac arrest. It also includes an accelerometer for tracking physical activity, an ECG heart activity tracker and bioelectrical impedance monitoring.

“Traditionally, blood oxygen saturation is measured with a separate device attached to the finger. This is not very practical for daily living, so we developed a new technique that performs the measurement with a chest patch, via reflective photoplethysmography. By adding this sensing capability to our wearable solution, we are now able to measure three essential vital signs – heart rate, breathing rate and blood oxygen saturation – with a single unobtrusive and comfortable chest patch,” explains Bernard Grundlehner.

Visit imec at the #42974 imec and TNO/Holst Centre at booth #43164 of CES from January 8-11 in Las Vegas, Nevada, USA.

About imec

Imec is the world-leading research and innovation hub in nanoelectronics and digital technologies. The combination of our widely acclaimed leadership in microchip technology and profound software and ICT expertise is what makes us unique. By leveraging our world-class infrastructure and local and global ecosystem of partners across a multitude of industries, we create groundbreaking innovation in application domains such as healthcare, smart cities and mobility, logistics and manufacturing, energy and education.

As a trusted partner for companies, start-ups and universities we bring together more than 4,000 brilliant minds from over 85 nationalities. Imec is headquartered in Leuven, Belgium and has distributed R&D groups at a number of Flemish universities, in the Netherlands, Taiwan, USA, China, and offices in India and Japan. In 2017, imec’s revenue (P&L) totaled 546 million euro. Further information on imec can be found at www.imec-int.com.

Imec is a registered trademark for the activities of IMEC International (a legal entity set up under Belgian law as a “stichting van openbaar nut”), imec Belgium (IMEC vzw supported by the Flemish Government), imec the Netherlands (Stichting IMEC Nederland, part of Holst Centre which is supported by the Dutch Government), imec Taiwan (IMEC Taiwan Co.) and imec China (IMEC Microelectronics (Shanghai) Co. Ltd.) and imec India (Imec India Private Limited), imec Florida (IMEC USA nanoelectronics design center).

About TNO

The Netherlands Organization for Applied Scientific Research (TNO) is an independent research organization. We connect people and knowledge to create innovations that boost the sustainable competitive strength of industry and well-being of society. Now and in the future. This is our mission and it is what drives us, the over 3.000 professionals at TNO, in our work every day. We work in collaboration with partners and focus on transitions or changes in nine social themes that we have identified together with our stakeholders.

About Holst Centre
Holst Centre is an independent R&D centre that develops technologies for wireless autonomous sensor technologies and flexible electronics, in an open innovation setting and in dedicated research trajectories. A key feature of Holst Centre is its partnership model with industry and academia based around roadmaps and programs. It is this kind of cross-fertilization that enables Holst Centre to tune its scientific strategy to industrial needs. 

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Automotive/Industrial PSoC™ High Voltage (HV) Overview
Sponsored by Mouser Electronics and Infineon
In this episode of Chalk Talk, Amelia Dalton and Marcelo Williams Silva from Infineon explore the multitude of benefits of Infineon’s PSoC 4 microcontroller family. They examine how the high precision analog blocks, high voltage subsystem, and integrated communication interfaces of these solutions can make a big difference when it comes to the footprint size, bill of materials and functional safety of your next automotive design.
Sep 12, 2023
27,891 views