industry news
Subscribe Now

Analog Devices Introduces Step-Down Buck Converter that Reduces Space in Multi-Cell Battery Applications

WILMINGTON, Mass. – Jan. 31, 2022 – Analog Devices, Inc. (ADI) today introduced the MAX77540 step-down buck converter, which provides single stage power conversion in multi-cell battery applications, such as augmented reality/virtual reality (ARVR) headsets, land mobile radios (LMRs) and digital single-lens reflex (DSLR) cameras. The power-dense MAX77540 buck converter features 94 percent peak efficiency and wafer level packaging that measures 61 percent smaller than traditional quad flat no-lead packages.

Multi-cell battery applications require two stage power conversion and long battery life in the smallest package possible. Traditional methods, such as using a front-end converter to step down to 5V or below, and subsequently, stepping down further to system level voltages, are inefficient and therefore impact the battery life of the system. This approach requires an additional converter, which often requires an inductor, ultimately driving a larger solution footprint and higher cost.

With the MAX77540, the design engineer can easily create either dual 3A or a single 6A output(s). Default power on configuration only requires two external resistors, and an I2C interface allows further control for advanced power management techniques. External frequency tracking and spread spectrum modulation provide low electromagnetic interference (EMI) power conversions for data sensing and processing equipment.

MAX77540 Buck Converter Key Features:

  • Wide 4V to 16V input voltage range and two 3A switching phases provide single step conversions to core voltages from USB-C rails and 2S and 3S multi-cell batteries.
  • Wafer level package measures 61 percent (2.5x) smaller than traditional quad flat no-lead packaging to fit in the most space-constrained applications.
  • 94 percent peak efficiency measured at 7.4V to 3.3V extends battery life.

Availability and Packaging

Product Full

Production

 

Packaging
MAX77540 NOW 2.51mm x 2.31mm

30-bump wafer-level package (WLP)

MAX77540EVKIT NOW N/A

About Analog Devices

Analog Devices, Inc. operates at the center of the modern digital economy, converting real-world phenomena into actionable insight with its comprehensive suite of analog and mixed signal, power management, radio frequency (RF), and digital and sensor technologies. ADI serves 125,000 customers worldwide with more than 75,000 products in the industrial, communications, automotive, and consumer markets. ADI is headquartered in Wilmington, MA. Visit https://www.analog.com.

Leave a Reply

featured blogs
May 6, 2026
Hollywood has struck gold with The Lord of the Rings and Dune'”so which sci-fi and fantasy books should filmmakers tackle next?...

featured paper

Want early design analysis without simulation?

Sponsored by Siemens Digital Industries Software

Traditional verification methods are failing today's complex IC designs, which require a proactive, early-stage analysis approach. A shift-left methodology addresses IP block integration challenges and the limitations of traditional simulation and ERC tools. Insight Analyzer detects hard-to-find leakage issues across power domains, enabling early analysis without full simulation. Identify inefficiencies earlier to reduce rework, improve reliability, and enhance power performance.

Click to read more!

featured chalk talk

CBOT MULTIGIG Transceiver Platform
In this episode of Chalk Talk, Anders Thelin from TE Connectivity and Amelia Dalton explore how the CBOT MULTIGIG transceiver platform helps address these challenges with a modular, high-performance approach to rugged, high-density connectivity. We also investigate how this platform supports next-generation system architectures, improves design efficiency, and enables robust performance in even the most demanding environments.
May 18, 2026
5,835 views