industry news
Subscribe Now

Maxim’s Defibrillation and ESD Protection Device Safeguards Medical Applications with 100x Less Leakage Current

San Jose, CA—February 28, 2017—Targeting medical equipment such as defibrillators as well as ECG diagnostics and monitoring systems, the MAX30034 defibrillation protection device from Maxim Integrated Products, Inc. (NASDAQ: MXIM) protects against defibrillation pulses and electrostatic discharge (ESD). Compared to existing approaches and components, it simplifies design, provides > 75% space savings, and trims the bill of materials, all while significantly improving performance.

Designers of defibrillators and ECG monitors face a challenge, as their ECG input amplifiers must withstand high-voltage pulses for cardiac resuscitation. These pulses can easily damage the sensitive electronic circuitry which captures the millivolt level heart signals. Preventing this damage has required a three-layer, multi-component approach combining a per-channel gas-discharge tube (GDT) and/or transient-voltage suppression (TVS) device, as well as ESD-protection diodes. Further, leakage current (a critical parameter) is relatively high, at about 1-2nA.

Maxim’s four-channel MAX30034 defibrillation protection device uses an innovative topology from an advanced semiconductor process to absorb and harmlessly redirect these high-energy pulses away from sensitive circuitry. This small and robust device needs only two external pairs of resistors for each channel to provide design simplicity, smaller overall size, and lower leakage current. The MAX30034 replaces the primary-level GDTs and/or TVSs, as well as secondary-level ESD diodes which are the conventional solutions for mandated circuit protection. The device can withstand over 100,000 defibrillation pulses without failure and still maintain a leakage current under 10pA (100x less than GDT/TVS-based approaches).

Key Advantages

  • Ease of Design: A single, tiny IC, and two external resistor pairs per channel are all that is needed
  • Robust: Leakage current is 100x less than GDT/TVS-based approaches even after 100,000 5kV pulses
  • Small: Replaces complicated primary, secondary, and ESD protection solutions for > 75% space savings; 3mm x 5mm µMAX® package (0 to 70°C operating temperature range)

Commentary

  • “Customers need innovative, tightly focused components like this,” said Andrew Baker, Executive Director for Industrial and Healthcare at Maxim Integrated. “It completely changes the component solution to the long-standing challenge of protecting the medical device against a defibrillation pulse.”

Availability and Pricing

  • The MAX30034 is priced at $3.40 (1000-up, FOB USA)
  • An evaluation kit is available for $25: MAX30034EVKIT#
  • Both are in stock at all Maxim-franchised distributors

About Maxim Integrated

Maxim Integrated develops innovative analog and mixed-signal products and technologies to make systems smaller and smarter, with enhanced security and increased energy efficiency. We are empowering design innovation for our automotive, industrial, healthcare, mobile consumer, and cloud data center customers to deliver industry-leading solutions that help change the world. Learn more ›

Leave a Reply

featured blogs
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Maximizing High Power Density and Efficiency in EV-Charging Applications
Sponsored by Mouser Electronics and Infineon
In this episode of Chalk Talk, Amelia Dalton and Daniel Dalpiaz from Infineon talk about trends in the greater electrical vehicle charging landscape, typical block diagram components, and tradeoffs between discrete devices versus power modules. They also discuss choices between IGBT’s and Silicon Carbide, the advantages of advanced packaging techniques in both power discrete and power module solutions, and how reliability is increasingly important due to demands for more charging cycles per day.
Dec 18, 2023
18,398 views