industry news
Subscribe Now

Wideband 2GHz to 14GHz Mixer with Integrated LO Frequency Doubler Offers Outstanding IIP3 of 24.4dBm

MILPITAS, CA – August 10, 2015 – Linear Technology announces the LTC5549, a double-balanced mixer that can operate either as an upconverter or downconverter, with a very wide RF frequency range from 2GHz to 14GHz. The LTC5549 offers exceptionally high linearity of 24.4 dBm IIP3 at 9GHz. The LTC5549 enables efficient microwave transmitter and receiver designs with an integrated LO buffer that needs only a 0dBm drive level, effectively eliminating an external high power LO amplifier circuit. Moreover, the LTC5549 has an integrated on-chip, switchable frequency doubler for LO signal, providing an option to use lower cost, commonly available low frequency synthesizers. The LTC5549 employs wideband integrated balun transformer optimized to extend RF frequency bandwidth from 2GHz to 14GHz while enabling single-ended operation. Its IF port also has wide bandwidth up to 6GHz. All three ports are 50? matched. The mixer offers high port-to-port isolation, minimizing undesireable LO leakage, and easing external filtering requirements.

The LTC5549’s performance enhances a wide range of microwave applications including microwave backhaul, high unlicensed band LTE-Advanced base stations, satellite broadband radios, radar systems, X-band and Ku band transceivers, test equipment and satellite modems.

The LTC5549 offers improved ESD protection with its 2,000V ESD human body model (HBM) rating on all pins. The device is available in a tiny 12-lead, 3mm x 2mm plastic QFN package. With its minimal external component design, the LTC5549 results in a compact solution footprint. The device is rated for operation from -40°C to 105°C case temperature to support extended environmental operating temperature. The mixer is optimized for single 3.3V supply operation, drawing a nominal supply current of 115mA. Additionally, the LTC5549 has an enable pin to disable the IC. When deactivated, the device draws only 100µA maximum standby current. The enable pin can be driven directly to turn the device on and off rapidly in less than 0.2µs, supporting time-division duplex (TDD) or burst mode type radios. The LTC5549 is priced starting at $9.50 each in 1,000-piece quantities. Samples and production quantities are available immediately. For more information, visitwww.linear.com/product/LTC5549.

Summary of Features: LTC5549

  • Operating RF Frequency
    2GHz to 14GHz
  • Upconversion or Downconversion
  • IF Frequency Range
    0.5GHz to 6GHz
  • High Input IIP3
    24.4dBm
  • Low Conversion Loss
    8.0dB
  • Low LO Drive Level 
    0dBm
  • Integrate Bypassable 
    LO Frequency Doubler

 

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Why Wiwynn Energy-Optimized Data Center IT Solutions Use Cadence Optimality Explorer

Sponsored by Cadence Design Systems

In the AI era, as the signal-data rate increases, the signal integrity challenges in server designs also increase. Wiwynn provides hyperscale data centers with innovative cloud IT infrastructure, bringing the best total cost of ownership (TCO), energy, and energy-itemized IT solutions from the cloud to the edge.

Learn more about how Wiwynn is developing a new methodology for PCB designs with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

BMP585: Robust Barometric Pressure Sensor
In this episode of Chalk Talk, Amelia Dalton and Dr. Thomas Block from Bosch Sensortec investigate the benefits of barometric pressure sensors for a variety of electronic designs. They examine how the ultra-low power consumption, excellent accuracy and suitability for use in harsh environments can make Bosch’s BMP585 barometric pressure sensors a great fit for your next design.
Oct 2, 2023
27,001 views