industry news
Subscribe Now

Synchronous Rectifiers from Diodes Incorporated Offer High Integration and Efficiency for Portable Electronics Chargers

Plano, Texas – March 4, 2015 – Addressing the need for higher integration and efficiency in portable chargers, Diodes Incorporated has introduced two synchronous rectifiers: the APR3415 and APR34330. These devices combine a driver circuit with an internal MOSFET to provide cost effective rectification with reduced power dissipation and using fewer external components. Target applications include adapters/chargers for cellular and cordless phones, ADSL modems, MP3 players, and similar portable consumer products and home appliances.

The APR3415 and APR34330 are synchronous rectification switchers for 5V output-voltage applications operating in discontinuous conduction mode. Synchronous rectification can reduce secondary-side power dissipation, while the devices’ ability to sense the MOSFET drain-to-source voltage enables an optimized drive signal using fewer external components. The internal N-channel MOSFET has been optimized for low gate charge, low RDS(ON), fast switching speed and reverse recovery, which helps these devices provide a fast response to secondary-side voltage and can also improve the transient performance of a primary-side control system.

The APR3415 is aimed at designs requiring output currents up to 2A and is supplied in a standard SO-8 package. The APR34330 is intended for output currents up to 1.5A and is offered in an SO 8EP exposed-pad package. Both devices feature over-voltage protection (OVP) and VCC under voltage lock out, which is not typically available on competitive devices. This not only aids system safety and reliability, but also extends their use in additional application areas, such as standby and auxiliary power supplies.

In 1k piece quantities, the APR3415 is priced at $0.40 USD each while the APR34330 is priced at $0.38 USD each. Further information is available atwww.diodes.com.

About Diodes Incorporated

Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor’s SmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. Diodes’ products include diodes, rectifiers, transistors, MOSFETs, protection devices, functional specific arrays, single gate logic, amplifiers and comparators, Hall-effect and temperature sensors; power management devices, including LED drivers, AC-DC converters and controllers, DC-DC switching and linear voltage regulators, and voltage references along with special function devices, such as USB power switches, load switches, voltage supervisors, and motor controllers. Diodes’ corporate headquarters and Americas’ sales office are located in Plano, Texas. Design, marketing, and engineering centers are located in Plano; San Jose, California; Taipei, Taiwan; Manchester, England; and Neuhaus, Germany. Diodes’ wafer fabrication facilities are located in Kansas City, Missouri and Manchester, with two additional facilities located in Shanghai, China.  Diodes has assembly and test facilities located in Shanghai and in Chengdu, China, as well as in Neuhaus and Taipei. Additional engineering, sales, warehouse, and logistics offices are located in  Taipei; Hong Kong; Manchester; Shanghai; Shenzhen, China; Seongnam-si, South Korea;  and Munich, Germany, with support offices throughout the world. For further information, including SEC filings, visit Diodes’ website atwww.diodes.com.

Leave a Reply

featured blogs
Apr 26, 2024
LEGO ® is the world's most famous toy brand. The experience of playing with these toys has endured over the years because of the innumerable possibilities they allow us: from simple textbook models to wherever our imagination might take us. We have always been driven by ...
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Introducing QSPICE™ Analog & Mixed-Signal Simulator
Sponsored by Mouser Electronics and Qorvo
In this episode of Chalk Talk, Amelia Dalton and Mike Engelhardt from Qorvo investigate the benefits of QSPICE™ - Qorvo’s Analog & Mixed-Signal Simulator. They also explore how you can get started using this simulator, the supporting assets available for QSPICE, and why this free analog and mixed-signal simulator is a transformational tool for power designers.
Mar 5, 2024
6,012 views