industry news
Subscribe Now

Ultrathin 1.8mm, 3A µModule Regulator in 6.25mm x 6.25mm LGA Package for PCIe, ATCA, microTCA Cards & Backside PCB Assembly

MILPITAS, CA – December 1, 2014 – Linear Technology Corporation introduces the LTM4623 3A µModule (micromodule) step-down regulator in an ultrathin 1.8mm profile LGA package with only a 6.25mm x 6.25mm footprint. With solder paste, the package height is less than 2mm, meeting the height restrictions of many PCIe (Peripheral Component Interconnect Express), Advanced Mezzanine Cards (AMC) for AdvancedTCA carrier cards in embedded computing systems. The small size and low height allow the LTM4623 to be mounted on the backside of the PCB, freeing space on the topside for components such as memory and FPGAs. The LTM4623 operates from 4V to 20V input supplies and precisely regulates an output voltage from 0.6V to 5.5V with 1.5% maximum total DC output voltage error, Application examples include ultra-dense data storage, gateway controllers and 40Gbps to 100Gbps network equipment.

The LTM4623 solution fits in a 0.5cm² dual-sided PCB or <1cm² on a single-sided PCB. The circuit only requires one input capacitor and one output capacitor, a resistor to set VOUT, and a small capacitor for VOUTtracking and soft-start. With an auxiliary 5V bias, the LTM4623 operates from input supplies as low as 2.375V. The operating efficiency for converting 12VIN to 1.5VOUTand 3.3VOUT at 3A is 80% and 88%, respectively. Power loss for 12VIN to 1.5VOUT is 1.1W, resulting in only a 24°C rise in junction temperature. The LTM4623 is rated for operation from -40°C to 125°C. 1,000-piece pricing starts at $6.05 each. For more information, visitwww.linear.com/product/LTM4623.

Summary of Features: LTM4623

  • Ultrathin 1.8mm x 6.25mm x 6.25mm LGA 3A µModule® Regulator
  • <0.5cm² Total Solution, Dual-Sided PCB
  • Wide Input Voltage Range = 4V to 20V
  • Output Voltage Adjustable with Resistor from 0.6V to 5.5V
  • Overvoltage, Overcurrent & Overtemperature Protection.

The USA list pricing shown is for budgetary use only. International prices may differ due to local duties, taxes, fees and exchange rates.

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.


Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Introducing Altera® Agilex 5 FPGAs and SoCs

Sponsored by Intel

Learn about the Altera Agilex 5 FPGA Family for tomorrow’s edge intelligent applications.

To learn more about Agilex 5 visit: Agilex™ 5 FPGA and SoC FPGA Product Overview

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Designing for Functional Safety with Infineon Memory
Sponsored by Mouser Electronics and Infineon
In this episode of Chalk Talk, Amelia Dalton and Alex Bahm from Infineon investigate the benefits of Infineon’s SEMPER NOR Flash and how the reliability, long-term data retention, and functional safety compliance make this memory solution a great choice for a variety of mission critical applications. They also examine how SEMPER NOR Flash has been architected and designed for functional safety and how Infineon’s Solutions Hub can help you get started using SEMPER NOR Flash in your next design.
Apr 22, 2024
1,571 views