industry news
Subscribe Now

Ultra compact 15 Watt AC-DC power supply targets medical applications

XP Power today announced the EML15 series of 15 Watt single output AC-DC power supplies suitable for use in medical equipment. Complying with 3rd edition EN60601-1, ES60601-1, CSA-C22.2 No. 60601-1, IEC60601-1 medical safety standards, this extremely compact power supply is believed to be the smallest device at this power rating available in the industry. The supply provides two means of patient protection (MOPP) between primary and secondary. Measuring just 2.44 x 1.21 x 0.95 inches (62.0 x 30.7 x 24.4 mm) for the open-frame pcb mount version, the EML15 occupies very little board space and also offers a very high power density for this type of supply of 5.3 Watts per cubic inch. With its Class II construction no earth connection is required, this being ideal where a reliable ground connection may not be available.

Eight single output models are available in the common nominal output voltages from +3.3 to + 48 VDC. A peak load capability allows the EML15 to provide 130% of rated output power in order to accommodate short-term high power loads. This approach allows designers to avoid having to specify a higher rated power supply and saves both extra cost and board space.

In addition to an open frame PCB mounting format other optional mounting packages are available, these include open frame chassis mount with connectors, and encapsulated models with either PCB mounting or screw terminals. A DIN rail mounting clip is also available for use with the encapsulated screw terminal package option.

The EML15 series is convection cooled and able to operate in most environments with a wide temperature range of – 25 degrees C to +70 degrees C. Derating is applied above +50 degrees C. No forced air flow or additional heat sinking is required.

The series meets the limits for Class B conducted and radiated EMC specifications of EN55022 without the need for any additional external filtering components.

The EML15 series is priced at $23.40 for 500 pcs orders. They are available from Newark or direct from XP Power and come with a 3 year warranty.

Leave a Reply

featured blogs
Apr 26, 2024
LEGO ® is the world's most famous toy brand. The experience of playing with these toys has endured over the years because of the innumerable possibilities they allow us: from simple textbook models to wherever our imagination might take us. We have always been driven by ...
Apr 26, 2024
Biological-inspired developments result in LEDs that are 55% brighter, but 55% brighter than what?...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

E-Mobility - Charging Stations & Wallboxes AC or DC Charging?
In this episode of Chalk Talk, Amelia Dalton and Andreas Nadler from Würth Elektronik investigate e-mobility charging stations and wallboxes. We take a closer look at the benefits, components, and functions of AC and DC wallboxes and charging stations. They also examine the role that DC link capacitors play in power conversion and how Würth Elektronik can help you create your next AC and DC wallbox or charging station design.
Jul 12, 2023
33,066 views