industry news
Subscribe Now

Isolated Flyback Regulator Eliminates Opto-Coupler & Delivers up to 6 Watts

MILPITAS, CA – March 6, 2014 – Linear Technology Corporation announces the LT8301a monolithic flyback regulator that significantly simplifies the design of isolated DC/DC converters. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no opto-isolator or third winding for regulation. The LT8301 operates over a 2.7V to 42V input voltage range, has a 1.2A/65V power switch and delivers up to 6 watts of output power, making it well suited for a wide variety of industrial, medical, datacom, military and automotive applications.

The LT8301 operates in boundary mode, which is a variable frequency current-mode control switching scheme, typically resulting in ±5% regulation over the full line, load and temperature range. The output voltage is easily set by a single resistor and the transformer turns ratio. Several off-the-shelf transformers, identified in the data sheet, can be used for numerous applications. The high level of integration, boundary mode and the use of low ripple BurstMode® operation result in a simple to use, low component count highly efficient solution. Additional features included overload protection, a 380µA no load quiescent current with the output voltage in regulation, internal soft start, internal loop compensation, and output diode temperature compensation.

The LT8301 is available in a small TSOT-23 package. Extended and industrial versions operate over a junction temperature range of -40°C to 125°C. A high temperature automotive grade operates from -40°C to 150°C and a military grade operates from -55°C to 150°C. Pricing starts at $2.76 each in 1000-piece quantities. For more information, visit www.linear.com/product/LT8301.

Summary of Features: LT8301

  • VIN Range from 2.7V to 42V
  • Onboard 1.2A, 65V Integrated Power Switch
  • No Opto-Coupler, Transformer or Third Winding Required for Feedback
  • 380µA Quiescent Current
  • Boundary-Mode Operation
  • VOUT Set with One External Resistor
  • Off-the-Shelf Transformers
  • Output Voltage Temperature Compensation
  • TSOT-23 Package
  • Extended & Industrial Grades:
    -40°C to 125°C Operating Junction Temp
  • Automotive Temp Grade:
    -40°C to 150°C Operating Junction Temp
  • Military Temp Grade:
    -55°C to 150°C Operating Junction Temp

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visitwww.linear.com.

, LT, LTC, LTM, Linear Technology, the Linear logo, Burst Mode and µModule are registered trademarks of Linear Technology Corp. All other trademarks are the property of their respective owners.

Leave a Reply

featured blogs
May 2, 2024
I'm envisioning what one of these pieces would look like on the wall of my office. It would look awesome!...
Apr 30, 2024
Analog IC design engineers need breakthrough technologies & chip design tools to solve modern challenges; learn more from our analog design panel at SNUG 2024.The post Why Analog Design Challenges Need Breakthrough Technologies appeared first on Chip Design....

featured video

Introducing Altera® Agilex 5 FPGAs and SoCs

Sponsored by Intel

Learn about the Altera Agilex 5 FPGA Family for tomorrow’s edge intelligent applications.

To learn more about Agilex 5 visit: Agilex™ 5 FPGA and SoC FPGA Product Overview

featured paper

Altera® FPGAs and SoCs with FPGA AI Suite and OpenVINO™ Toolkit Drive Embedded/Edge AI/Machine Learning Applications

Sponsored by Intel

Describes the emerging use cases of FPGA-based AI inference in edge and custom AI applications, and software and hardware solutions for edge FPGA AI.

Click here to read more

featured chalk talk

Enabling IoT with DECT NR+, the Non-Cellular 5G Standard
In the ever-expanding IoT market, there is a growing need for private, low cost networks. In this episode of Chalk Talk, Amelia Dalton and Heidi Sollie from Nordic Semiconductor explore the details of DECT NR+, the world’s first non-cellular 5G technology standard. They investigate how this self-healing, decentralized, autonomous mesh network can help solve a variety of IoT connectivity issues and how Nordic is helping designers take advantage of DECT NR+ with their nRF91 System-in-Package family.
Aug 17, 2023
31,003 views