Halstenbek, Germany – November 6th, 2009 – TEWS TECHNOLOGIES extends its tradition of delivering high-density I/O solutions with the introduction of a synchronous/asynchronous serial single width / mid-height AMC.1 compliant module with four high speed communication channels. The TAMC863 is designed for data communications, LAN/WAN networking, military communications, traffic control, simulation, and telecommunications applications.
The serial communication controller is implemented in FPGA logic, combined with the bus master capable PCI interface. The FGPA design guarantees long term availability with the option to implement additional application specific functions for customers.
Several serial communication protocols are supported by each channel, such as asynchronous, isochronous, synchronous and HDLC mode. In addition, a maximum data rate of 10 Mbit/sec is provided for synchronous protocols and 2 Mbit/sec is supported for asynchronous protocols.
Multiprotocol transceivers are used for the line interface. The physical interface of each channel can be independently software selected for EIA-232, EIA-422, EIA-449, EIA-530, EIA-530A, V.35, V.36 or X.21.
In order to significantly reduce the processing overhead, the TAMC863 features receive and transmit FIFOs of 512 long words (32 bit) per channel. Data transfer on the PCI bus is handled via TAMC863 initiated DMA cycles with minimum host/CPU intervention. In addition, several interrupt sources can generate interrupts on INTA for each channel, and interrupts may be enabled or disabled separately.
Asynchronous and basic synchronous support for major operating systems such as Windows, Linux, VxWorks, and QNX is available.
The TAMC863 operates in extended temperature range (-40°C to +85°C). All TEWS TECHNOLOGIES products, including the TAMC863, feature a five-year warranty.
About TEWS TECHNOLOGIES
TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, IndustryPack® (IP), CompactPCI, standard PCI, and VME. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this ‘customer first’ approach, TEWS has developed a large number of standard and custom products for applications in industrial control, telecommunication infrastructure, medical equipment, traffic control and aerospace/defense. TEWS’ line of embedded I/O solutions is available worldwide through a global network of distributors. For more information, go to www.tews.com.
