editor's blog
Subscribe Now

IoT Paranoia – Not a Bad Thing

While the Internet of Things (IoT) is full of promise, there’s one word that summarizes all that people fear about it: security.

We got to hear a bit about that at a session dedicated to the topic at the recent Internet of Things Engineering Summit co-conference at EE Live. Presented by consultant George Neville-Neil, it wasn’t about technology per se; it was about our state of mind.

Most of us believe it’s important to keep intruders out. His main takeaway: assume they will get in. Because, eventually, they will. Building sturdy walls is good and important, but planning for what happens next is also important.

What caught my ear in particular is one of the less-obvious possible consequences of not minding the store properly: a “consent decree.” I’ve heard the term in a generic sense, but it’s not obvious what the implications are if you’ve never had one (which I haven’t, which is why I asked). Apparently, if you’ve been careless with security, a consent decree allows the Federal Trade Commission (FTC) to become your overseer, getting all up in your business and stepping in when they want. Most of all, the documentation required during the term of the decree sounds particularly onerous. So… avoid this.

That aside, the following are my attempt to summarize his supporting recommendations (“attempt” because I was writing furiously to keep up):

  • Shrink the “attack surface” (i.e., expose less). Meaning, drivers, daemons, features, debug access, web servers, data loggers, etc.
  • Separate out “concerns.” I.e., no processes with root access or super-control; restrict access to data. Nothing gets access to anything irrelevant.
  • “Defense in Depth” – rings of security. What happens when the first wall is breached?
  • Provide only those features really needed. (OK, marketing will have a fun time with this. You know the drill:
    • Marketing: Here are the features we need in the next release.
    • Engineering: You can’t have them all; which ones do you really need?
    • Marketing: We need them all. We didn’t bother asking for the nice-to-haves.
    • Engineering: Well, which of these do you need least?

In other words, marketing probably already thinks they’re getting less than the really-needed features.)

  • Be conservative in what data you accept and send.
  • Review your code.
  • Review other people’s code – especially when incorporating someone else’s code or IP. Do an internet search for the package along with words like “crash” or swear words to find red flags.
  • Use “sandboxing” to provide isolation.
  • Use automation to test and analyze your code. Oh, and don’t forget to look at the results.
  • And, the bottom line, “Plan for Compromise.”

And sleep with one eye open. Because They’re coming, you know…

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Advanced Gate Drive for Motor Control
Sponsored by Infineon
Passing EMC testing, reducing power dissipation, and mitigating supply chain issues are crucial design concerns to keep in mind when it comes to motor control applications. In this episode of Chalk Talk, Amelia Dalton and Rick Browarski from Infineon explore the role that MOSFETs play in motor control design, the value that adaptive MOSFET control can have for motor control designs, and how Infineon can help you jump start your next motor control design.
Feb 6, 2024
11,177 views