Thalwil, Switzerland – April 21, 2016 – u-blox, a global leader in wireless and positioning modules and chips, in collaboration with Neul has convinced its peers of the need for an extra power class for devices used in Narrowband-IoT (NB-IoT) applications. As a result, a maximum transmit power of 20 dBm has been approved on the occasion of the latest 3GPP RAN working groupmeeting ramping up to the 3GPP Release 13 of NB-IoT standards in June. This additional power class with lower maximum transmitted power could help to reduce the peak current consumption from the battery, hence enabling NB-IoT to be suitable for a wider range of IoT applications, such as wearables and tracking.
NB-IoT is a Low Power Wide Area (LPWA) technology for IoT applications, available for deployment over existing mobile networks, in licensed radio spectrum. These applications have low data rates, require long battery lives and operate unattended for long periods of time, often in remote locations. In many use cases of NB-IoT applications, no local power supply is available, either for convenience (water meter, tracker, covert security sensor, outdoor sensor) or safety (gas meter) reasons. The operational justification for an application also often depends on not having to visit a location to replace a battery as the cost of a “truck roll” is high.
Batteries for long life applications, up to 10 years for some utility meters, are therefore crucial. They must also be small to fit into all IoT devices and be able to operate at very low temperatures.
For more information about NB-IoT at u-blox: https://www.u-blox.com/en/narrowband-iot-nb-iot
About u-blox
Swiss u-blox (SIX:UBXN) is a global leader in wireless and positioning semiconductors and modules for the automotive, industrial and consumer markets. u-blox solutions enable people, vehicles and machines to locate their exact position and communicate wirelessly over cellular and short range networks. With a broad portfolio of chips, modules and software solutions, u-blox is uniquely positioned to empower OEMs to develop innovative solutions for the Internet of Things, quickly and cost-effectively. With headquarters in Thalwil, Switzerland, u-blox is globally present with offices in Europe, Asia and the USA.
6 thoughts on “Power Class 5 (20 dBm) approved by 3GPP for NB-IoT applications”