industry news
Subscribe Now

Exar’s Quad Universal PMIC Delivers >40A/Output

Fremont, CA – February 10, 2015 – Exar Corporation (NYSE: EXAR), a leading supplier of high performance integrated circuits and system solutions, today introduced the XR77128, a universal PMIC which drives up to 4 independently controlled external DrMOS power stages at currents >40A for the latest 64-bit ARM processors, FPGAs, DSPs and ASICS.  DrMOS technology is quickly growing in popularity in telecom and networking applications.  These same applications find value in Exar’s Programmable Power technology which allows low component count, rapid development, easy system integration, dynamic control and telemetry.  Depending on output current requirements, each output can be independently configured to directly drive external MOSFETs or DrMOS power stages.

The XR77128 is quickly configured to power nearly any FPGA, SOC or DSP system through the use of Exar’s design tool, PowerArchitectTM and programmed through an I²C based SMBus compliant serial interface.  It can also monitor and dynamically control and configure the power system through the same I2C interface.  Five configurable GPIOs allow for fast system integration for fault reporting and status or for sequencing control.   A new Arduino-based development platform allows software engineers to begin code development for telemetry and dynamic control long before their hardware is available.

The XR77128 is available in a RoHS compliant, green/halogen free space-saving 7mm × 7mm TQFN and is priced at $7.75 in 1000-piece quantities. For more information, visit www.exar.com/xr77128.

Summary of features:

  • DrMOS and/or MOSFET drive capability
  • 4.75V to 25V input voltage
  • Quad channel step-down controller
  • Digital PWM 105kHz to 1.23MHz operation
  • SMBus compliant I2C interface
  • Supported by PowerArchitect 5.2 or later
  • Arduino development system

About Exar

Exar Corporation designs, develops and markets high performance integrated circuits and system solutions for the industrial and embedded systems communications, high-end consumer and infrastructure markets. Exar’s broad product portfolio includes analog, display, LED lighting, mixed-signal, power management, connectivity, data management and video processing solutions. Exar has locations worldwide providing real-time customer support.  For more information, visit www.exar.com.

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

How MediaTek Optimizes SI Design with Cadence Optimality Explorer and Clarity 3D Solver

Sponsored by Cadence Design Systems

In the era of 5G/6G communication, signal integrity (SI) design considerations are important in high-speed interface design. MediaTek’s design process usually relies on human intuition, but with Cadence’s Optimality Intelligent System Explorer and Clarity 3D Solver, they’ve increased design productivity by 75X. The Optimality Explorer’s AI technology not only improves productivity, but also provides helpful insights and answers.

Learn how MediaTek uses Cadence tools in SI design

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Improving Chip to Chip Communication with I3C
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Toby Sinkinson from Microchip explore the benefits of I3C. They also examine how I3C helps simplify sensor networks, provides standardization for commonly performed functions, and how you can get started using Microchips I3C modules in your next design.
Feb 19, 2024
9,282 views