industry news
Subscribe Now

STMicroelectronics Slims Ultra-Portable Displays with I2C Serial EEPROMs in Industry-Leading Tiny, Lightweight Package

Geneva, March 17, 2014 – STMicroelectronics is taking serial EEPROM to the next level of miniaturization with its latestUFDFPN5 devices measuring just 1.4mm x 1.7mm.

The low-profile UFDFPN5 package (also known as MLP5) is easy to integrate with standard production processes, is 40% smaller than UFDFPN8, until now the smallest package size in widespread use, and weighs 56% less at only 7mg.

Ideal for building ultra-small and lightweight LCD modules in next-generation notebooks and tablets, the new EEPROM package starts with the M24C16-FMH6TG. This 16Kbit device is compatible with 400kHz and 100kHz I2C™-bus modes, has maximum byte or page write time of 5ms, and draws very low current of 1mA in read or write mode and 1µA in standby. 32Kbit, 64Kbit and 128Kbit variants supporting I2C will follow during 2014.

The M24C16-FMH6TG is available immediately in high volume, priced from $0.17 in the UFDFPN5 package for orders of 1,000 pieces.

 

For further information please go to http://www.st.com/eeprom.

Leave a Reply

featured blogs
Apr 25, 2024
Structures in Allegro X layout editors let you create reusable building blocks for your PCBs, saving you time and ensuring consistency. What are Structures? Structures are pre-defined groups of design objects, such as vias, connecting lines (clines), and shapes. You can combi...
Apr 25, 2024
See how the UCIe protocol creates multi-die chips by connecting chiplets from different vendors and nodes, and learn about the role of IP and specifications.The post Want to Mix and Match Dies in a Single Package? UCIe Can Get You There appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured paper

Designing Robust 5G Power Amplifiers for the Real World

Sponsored by Keysight

Simulating 5G power amplifier (PA) designs at the component and system levels with authentic modulation and high-fidelity behavioral models increases predictability, lowers risk, and shrinks schedules. Simulation software enables multi-technology layout and multi-domain analysis, evaluating the impacts of 5G PA design choices while delivering accurate results in a single virtual workspace. This application note delves into how authentic modulation enhances predictability and performance in 5G millimeter-wave systems.

Download now to revolutionize your design process.

featured chalk talk

Trends and Solutions for Next Generation Energy Storage Systems
Sponsored by Mouser Electronics and onsemi
Increased installations of DC ultra fast chargers, the rise of distributed grid systems, and a wider adoption of residential solar installations are making robust energy storage systems more important than ever before. In this episode of Chalk Talk, Amelia Dalton, Hunter Freberg and Prasad Paruchuri from onsemi examine trends in EV chargers, solar, and energy storage systems, the role that battery storage integration plays in energy storage systems, and how onsemi is promoting innovation in the world of energy storage systems.
Jan 29, 2024
12,441 views