News – Page 1950 – EEJournal

Rugged 350 W AC-DC power supplies comply with SEMI-F47 requirements

October 17, 2012

XP Power today announced the SHP350 series of single output rugged 350 W AC-DC power supplies aimed at industrial applications. Achieving a high power density of 6.6 Watts per cubic inch and with a typical efficiency of 85%, these compact fan-cooled units measure only 7.0 x 3.6 x 2.1 inches (177.8 x 91.44 x 53.34 mm).

The series comprises six single output models providing the popular nominal output voltages from +12 to +48 VDC. The output is also capable of being adjusted within +/- 10% in order to cater for any non-standard voltage applications. A remote sense facility compensates for a voltage drop of up to 0.5 V due to … Read More → "Rugged 350 W AC-DC power supplies comply with SEMI-F47 requirements"

RADX Technologies, Xilinx and Analog Devices Demonstrate Advanced, Programmable EdgeQAM Technology Solutions at SCTE Cable-Tec Expo 2012

October 17, 2012

ORLANDO, Fla., Oct. 17, 2012 – RADX^® Technologies, Inc., Xilinx, Inc. (NASDAQ: XLNX) and Analog Devices^®, Inc. (NASDAQ: ADI) are demonstrating the industry’s most scalable range of off-the-shelf, programmable EdgeQAM technology solutions here at SCTE Cable-Tec Expo 2012 (RADX Booth No. 2304). These innovative solutions enable cable TV equipment OEMs to develop and deploy next-generation EdgeQAM products that address cable TV operators’ most demanding QAM applications – from hospitality to full CCAP solutions.

Based on technologies from RADX (a Certified … Read More → "RADX Technologies, Xilinx and Analog Devices Demonstrate Advanced, Programmable EdgeQAM Technology Solutions at SCTE Cable-Tec Expo 2012"

Flexera Software to Present Session on Creating & Maintaining Value from Embedded Software at Telematics Munich Conference

October 17, 2012

Maidenhead, October 17, 2012 –

What:

Flexera Software’s Ed McNeil, Principle Strategy Consultant EMEA, will be presenting a session entitled, “Creating and Maintaining Value from Embedded Software” at the Telematics Munich 2012 Conference and Exhibition.

Edward McNeil is Principle Strategy Consultant at Flexera Software where he provides business solutions for companies seeking to monetise and protect their software intellectual property and gain return on investment for their software and embedded software. Flexera Software is a market leader in Read More → "Flexera Software to Present Session on Creating & Maintaining Value from Embedded Software at Telematics Munich Conference"

38V, 10A Rugged Step-Down µModule Regulator with Fail Safe Load Protection

October 17, 2012

MILPITAS, CA – October 17, 2012 – Linear Technology Corporation introduces the LTM4641, a 4.5V to 38V input, 0.6V to 6V output, 10A step-down µModule^® regulator with comprehensive electrical and thermal protection for loads such as processors, ASICs and high-end FPGAs. The LTM4641 µModule regulator monitors input voltage, output voltage and temperature conditions. If any user-adjustable trip thresholds are exceeded, the LTM4641 responds quickly within 500ns in the case of an output overvoltage … Read More → "38V, 10A Rugged Step-Down µModule Regulator with Fail Safe Load Protection"

Xilinx Accelerates Automotive Driver Assistance Deployment at SAE Convergence 2012

October 16, 2012

DETROIT, Oct. 16, 2012 – Xilinx, Inc. (NASDAQ: XLNX) today set the stage for an acceleration of the automotive industry’s development and deployment of a new generation of automotive driver assistance systems (ADAS). At the Society of Automotive Engineers (SAE) Convergence 2012 (booth #909) event, Xilinx unveiled its automotive ARM®-processor basedZynq™-7000 All Programmable system-on-a-chip (SoC) platform that can reduce the cost … Read More → "Xilinx Accelerates Automotive Driver Assistance Deployment at SAE Convergence 2012"

WirelessHART & Internet Protocol Wireless Sensor Networks Achieve Industry’s Lowest Power Consumption at Less Than 50µA per Node

October 16, 2012

MILPITAS, CA – October 16, 2012 – Linear Technology’s Dust Networks^® product group introduces the SmartMesh™ LTC5800 (system-on-chip) and LTP5900 (module) families, the industry’s lowest power IEEE 802.15.4E compliant wireless sensor networking … Read More → "WirelessHART & Internet Protocol Wireless Sensor Networks Achieve Industry’s Lowest Power Consumption at Less Than 50µA per Node"

Analog Bits Extends Industry Leadership to 20nm

October 16, 2012

Sunnyvale, CA, October 16, 2012 – Analog Bits, the leader in Integrated Clocking and Interface IP, today announced the successful completion of a tape-out in TSMC’s 20nm manufacturing process and the corresponding availability of a Mixed Signal Design Kit (MSDK) for this advanced node. This combination equips customers with reliable, industry leading IP products on the industry’s next high-volume node: TSMC’s 20-nm SoC process. These steps follow the successful volume production of Analog Bits IP products in various versions of 28nm nodes.

“Our 20nm MSDK will help current and future customers reduce production risk while accelerating their … Read More → "Analog Bits Extends Industry Leadership to 20nm"

Mentor Graphics Provides Design, Verification and Test Solutions for TSMC’s 20nm Design Infrastructure

October 16, 2012

WILSONVILLE, Ore., October 16, 2012—Mentor Graphics Corp. (NASDAQ: MENT) today announced new capabilities to complement TSMC’s 20nm manufacturing processes. Enhancements to support both digital and analog/mixed signal 20nm reference flows include new features in the Pyxis™ IC Station platform, the Eldo fast SPICE simulation products, the Olympus-SoC™ place and route system, the Calibre® nmDRC™, Calibre RealTime, Calibre PERC™ and Calibre xACT 3D solutions, and the Tessent® silicon test product suite.

“Each successive process node brings new challenges that require greater understanding between design and manufacturing to resolve,” said Wally Rhines, chairman and CEO … Read More → "Mentor Graphics Provides Design, Verification and Test Solutions for TSMC’s 20nm Design Infrastructure"

Altium releases new TASKING C compilers for Power Architecture and RH850, targeting ISO 26262 application development

October 16, 2012

Karlsruhe, Germany, 16 October 2012 – Altium has released two completely new TASKING <http://www.tasking.com/> C compiler solutions for automotive application development, delivering support for the RH850 microcontrollers from Renesas and the Power Architecture® based microcontrollers from the Freescale Qorivva/5xxx and STMicroelectronics SPC56 series. These new development solutions extend the range of popular TASKING toolsets for automotive microcontrollers like XC2000, ARM, ST10 and TriCore.

Both new compilers have been developed from the ground up, using Altium’s highly efficient Viper “VX” … Read More → "Altium releases new TASKING C compilers for Power Architecture and RH850, targeting ISO 26262 application development"

Synopsys Joins PACE Global Partnership

October 16, 2012

MOUNTAIN VIEW, Calif., Oct. 16, 2012 /PRNewswire/ –Synopsys, Inc. (Nasdaq:SNPS), a global leader providing software, IP and services used to accelerate innovation in chips and electronic systems, today announced it has joined the Partners for the Advancement of Collaborative Engineering Education (PACE) program. Through the PACE program, Synopsys’ Saber product line for the modeling and simulation of power, physical and multi-domain automotive systems will be provided to all 57 PACE institutions worldwide.

“Promoting math and science education around the world is a fundamental value at Synopsys,” said Howard Ko, senior vice president and general manager of the Silicon Engineering … Read More → "Synopsys Joins PACE Global Partnership"

featured blogs

What the FAQ are Perceptive, Enhancive, Generative, Agentic, and Physical AI (and Vibe Coding)

Mar 20, 2026

From machines that see and think, to systems that act, and the humans that nudge them along....