Halstenbek, Germany – April 13th, 2011. TEWS TECHNOLOGIES extends its tradition of delivering high-density I/O solutions with its introduction of the TPMC377 high-density Isolated Serial Communication Controller. The conduction cooled single-width 32-bit PMC module is ideal for applications in transportation, COTS, communications, and process control.
The TPMC377 can operate with 3.3V and 5.0V PCI I/O signaling voltage. It provides 4 channels of high performance RS232/RS422/RS485 selectable serial connectivity with P14 I/O. Each of the serial channels are isolated from the system and against each other by a digital isolator and an on-board integrated DC/DC converter. The cannels can be individually programmed to operate as RS232, RS422 or RS485 full/half duplex interfaces. In addition, programmable termination is provided for the RS422/RS485 interfaces. After power-up, all serial I/O lines are in a high impedance state for critical applications.
Each RS232 channel supports RxD, TxD, RTS, CTS and GND. RS422 and RS485 full duplex support a four wire interface (RX+, RX-, TX+, TX-) plus ground (GND). RS485 half duplex supports a two wire interface (DX+, DX-) plus ground (GND).
All channels generate interrupts on PCI interrupt INTA. For fast interrupt source detection the UART provides a special Global Interrupt Source Register.
Each serial channel of the PMC module has separate 64 byte receive and transmit FIFOs to significantly reduce the processing overhead required to provide data to and from the transmitters and receivers. The FIFO trigger levels are programmable, and the baud rate is individually selectable up to 921.6 kbps for RS232 channels and 5.5296 Mbps for RS422 channels. The UART offers readable FIFO levels.
The TPMC377 offers an operating temperature range of -40°C to +85°C. All TEWS TECHNOLOGIES products feature a five-year warranty.
Extensive software support for major operating systems such as Windows, Linux, LynxOS, VxWorks, Integrity and QNX is available.
About TEWS TECHNOLOGIES
TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, IndustryPack® (IP), CompactPCI, standard PCI, AMC, and VME. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this ‘customer first’ approach, TEWS has developed a large number of standard and custom products for industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS applications. TEWS’ line of embedded I/O solutions is available worldwide through a global network of distributors. For more information, go to www.tews.com.
