industry news
Subscribe Now

60V Input, 50µA Dual Synchronous Step-Down DC/DC Controller Features -55°C to 150°C Operating Junction Temperature Range

MILPITAS, CA – February 16, 2011 – Linear Technology Corporation announces the H- and MP-grade versions of the LTC3890/-1. This high voltage dual output synchronous step-down DC/DC controller draws only 50µA when one output is active and 60µA when both outputs are enabled. The 4V to 60V input supply range is designed to protect against high voltage transients, continue operation during automotive cold crank and cover a broad range of input sources and battery chemistries. Each output can be set from 0.8V to 24V at output currents up to 20 amps with efficiencies as high as 95%, making the LTC3890/-1 well suited for 12V or 24V automotive, heavy equipment, industrial control, robotics and telecom applications. These H- and MP-grade versions are guaranteed over operating junction temperatures from -40°C to 150°C and -55°C to 150°C, respectively.

The LTC3890/-1 has powerful on-chip 1.1Ohm MOSFET gate drivers. The device operates with a selectable fixed frequency between 50kHz and 900kHz, and can be synchronized to an external clock from 75kHz to 850kHz with its phased-locked loop (PLL). The user can select from continuous operation, pulse skipping and low ripple Burst Mode® operation during light loads. The LTC3890/-1’s 2-phase operation reduces input filtering and capacitance requirements. Its current mode architecture provides easy loop compensation, fast transient response and excellent line regulation. Output current sensing is accomplished by measuring the voltage drop across the output inductor (DCR) for the highest efficiency or by using an optional sense resistor.

This device is available in two versions. The LTC3890 is the fully featured part in a 32-lead 5mm x 5mm QFN package with functions including a clock out, clock phase modulation, two separate power good outputs and adjustable current limit. The LTC3890-1 is housed in a 28–pin SSOP package. The 1000-piece price starts at $5.85 each for the H-grade devices and $15.80 each for the MP-grade parts. For more information, visitwww.linear.com/product/LTC3890.

Summary of Features: LTC3890/-1

  • Wide Input Voltage Range: 4V to 60V
  • 50µA Quiescent Current with One Output Active & 60µA with Both Outputs Active
  • 14µA Shutdown Current
  • Wide Output Voltage Range:
    0.8V to 24V
  • Synchronous Rectification for up to
    95% Efficiency
  • DCR or RSENSE Current Sense
  • Selectable Low Ripple Burst Mode®Operation, Pulse Skipping or Continuous Operation
  • Selectable Fixed Operating Frequency from 50kHz to 900kHz
  • Synchronizable Operating Frequency from 75kHz to 850kHz with PLL
  • Current-Mode Control for Fast Transient Response & Easy Loop Compensation
  • Adjustable Soft-Start & Output Voltage Tracking
  • ±1% Voltage Reference Accuracy Over -40°C to 125°C
  • Output Overvoltage & Overcurrent Foldback Protection

About Linear Technology

Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, and µModule® subsystems.

Leave a Reply

featured blogs
Apr 23, 2024
Do you think you are spending too much time fine-tuning your SKILL code? As a SKILL coder, you must be aware that producing bug-free and efficient code requires a lot of effort and analysis. But don't worry, there's good news! The Cadence Virtuoso Studio platform ha...
Apr 22, 2024
Learn what gate-all-around (GAA) transistors are, explore the switch from fin field-effect transistors (FinFETs), and see the impact on SoC design & EDA tools.The post What You Need to Know About Gate-All-Around Designs appeared first on Chip Design....
Apr 18, 2024
Are you ready for a revolution in robotic technology (as opposed to a robotic revolution, of course)?...

featured video

MaxLinear Integrates Analog & Digital Design in One Chip with Cadence 3D Solvers

Sponsored by Cadence Design Systems

MaxLinear has the unique capability of integrating analog and digital design on the same chip. Because of this, the team developed some interesting technology in the communication space. In the optical infrastructure domain, they created the first fully integrated 5nm CMOS PAM4 DSP. All their products solve critical communication and high-frequency analysis challenges.

Learn more about how MaxLinear is using Cadence’s Clarity 3D Solver and EMX Planar 3D Solver in their design process.

featured chalk talk

PIC32CX-BZ2 and WBZ451 Multi-Protocol Wireless MCU Family
Sponsored by Mouser Electronics and Microchip
In this episode of Chalk Talk, Amelia Dalton and Shishir Malav from Microchip explore the benefits of the PIC32CX-BZ2 and WBZ45 Multi-protocol Wireless MCU Family and how it can make IoT design easier than ever before. They investigate the components included in this multi-protocol wireless MCU family, the details of the software architecture included in this solution, and how you can utilize these MCUs in your next design.
May 4, 2023
40,593 views